Study on Casting Defect Control of Austenitic 304 Complex Structural Parts

Ding, Huafeng,Jin, Xianzhi

DOI: https://doi.org/10.1007/s40962-022-00865-y

2022-09-17

International Journal of Metalcasting

Abstract:Because the medium and large-scale Austenitic 304 stainless steel cable protection valve belongs to the cavity valve body, with complex surface shape and structure, there are often some problems in the casting process, such as difficult local heat dissipation and disordered solidification sequence of liquid metal. This will lead to different degrees of shrinkage porosity and shrinkage cavity defects at the ear of the valve body, the bulge at the bottom and the fault of the inner wall of the valve body, and the molding quality is very difficult to control. In order to solve the problem of serious shrinkage porosity and shrinkage cavity in the actual production of valve body parts, the mathematical model was established, and the filling and solidification process of investment casting under traditional gating system was simulated by ProCAST software, the thermodynamic behavior of molten metal in solidification process was analyzed, and the causes of casting defects under traditional methods were found out. A new gating system was designed, and the shrinkage of castings was predicted by Niyama criterion. The experimental results show that the simulation results are consistent with the actual results, and the surface precision of the optimized valve body casting is high and the density is as high as 98.5%.

metallurgy & metallurgical engineering