Abstract:Due to the complex structure and thin thickness of the guide vane edge of the hydraulic retarder impeller, the casting defects such as shrinkage porosity and misrun are usually formed during casting, which have a close relationship with the filling and solidification process. In this work, the filling and solidification processes of impeller in various gating systems, named case 1 to 3, were simulated and the distribution characteristics of potential shrinkage porosity defects were predicted by ProCAST software based on the mathematical models, boundary conditions, and parameters of investment casting. The simulation results show that the aim of complete filling of the impeller can be achieved by using all of the three gating systems. However, only the case 3 gating system consisted with one sprue riser and four feeding risers can provide the impeller with suitable feeding channel in melt solidification process. Therefore, no predicted shrinkage porosities form in the impeller because the defects can transfer to the gating system during solidification. The optimized gating system have been verified by experiment, and the rapid casting of the impeller has been realized by using 3D printed polystyrene patterns. The results of visual and X-ray inspections show that both the misrun and shrinkage porosity defects were eliminated in the actually final cast, which matched well with the numerical simulation results for the investment casting of the impeller. Many experiment results of the new product show that these optimization gating system are very helpful to reduce the casting defect and to improve the product quality.

Computer-Aided Engineering (CAE) Simulation for the Robust Gating System Design: Improved Process for Investment Casting Defects of 316L Stainless Steel Valve Housing

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Optimization of Valve Body Process Based on HZCAE

Study on Casting Defect Control of Austenitic 304 Complex Structural Parts

Die Structure Optimization of Aluminum Alloy Wheel Low-Pressure Die Casting Based on CAE

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Optimization of Gating System Design for Die Casting of Thin Magnesium Alloy-Based Multi-Cavity LCD Housings

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Comparison of various gating systems for investment casting of hydraulic retarder impeller with complex geometry

Numerical Simulation for the Investment Casting Process of a Large-Size Titanium Alloy Thin-Wall Casing

Study on a CAD/CAE system of die casting

Simulation-enabled casting product defect prediction in die casting process

Research and Application of Foundry CAD/CAE System

Modeling of filling and solidification process for TiAl exhaust valves during suction casting

Analysis of Casting Defects in Investment Casting by Simulation

Optimization of Casting System Structure Based on Genetic Algorithm for A356 Casting Quality Prediction

The molding analysis of automobile parts using the die-casting system

Die-Casting Die Design Based on the Application of Cae Simulation

Optimization of vacuum counter-pressure casting process for an aluminum alloy casing using numerical simulation and defect recognition techniques

Study and Application of Cae Simulation in Die-Casting Die Design