Abstract:K439B nickel-based superalloy is a new type of high-temperature material. There is insufficient research on its constitutive equations and numerical modeling of thermal stress. Isothermal tensile experiments of K439B superalloy at different temperatures (20 °C–1,000 °C) and strain rates (1.33×10 −3 s −1 –5.33×10 −3 s −1 ) were performed by using a Gleeble-3800 simulator. The elastic moduli at different temperatures (20 °C–650 °C) were measured by resonance method. Subsequently, stress-strain curves were measured for K439B superalloy under different conditions. The elastic-viscoplastic constitutive equations were established and the correspongding parameters were solved by employing the Perzyna model. The verification results indicate that the calculated values of the constitutive equations are in good agreement with the experimental values. On this basis, the influence of process parameters on thermal stress was investigated by numerical simulation and orthogonal experimental design. The results of orthogonal experimental design reveal that the cooling mode of casting has a significant influence on the thermal stress, while pouring temperature and preheating temperature of shell mold have minimal impact. The distribution of physical fields under optimal process parameters, determined based on the orthogonal experimental design results, was simulated. The simulation results determine separately the specific positions with maximum values for effective stress, plastic strain, and displacement within the casting. The maximum stress is about 1,000.0 MPa, the plastic strain is about 0.135, and the displacement is about 1.47 mm. Moreover, the distribution states of thermal stress, strain, and displacement are closely related to the distribution of the temperature gradient and cooling rate in the casting. The research would provide a theoretical reference for exploring the stress-strain behavior and numerical modeling of the effective stress of the alloy during the casting process.

Semi-solid plasticity and deformation control of superalloy investment casting

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Deformation and recrystallization of single crystal nickel-based superalloys during investment casting

Dimensional control of ring-to-ring casting with a data-driven approach during investment casting

Elastic-viscoplastic constitutive equations of K439B superalloy and thermal stress simulation during casting process

Simulation and Experiments on Plasticity and Recrystallisation in SX Superalloys by Investment Casting

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Analysis of the mechanical deformation arising from investment casting of directionally solidified nickel-based superalloys

Numerical Simulation of Semi-Solid Die-Casting Process of Automobile Aluminum Alloy Part

Multi-scale Modeling of Solidification Process of Ni-based Superalloy Investment Castings

Physical Simulation of Investment Casting for GTD-222 Ni-based Superalloy Processed by Controlled Cooling Rates

A Study on the Numerical Simulation of Thermal Stress During the Solidification of Shaped Castings

Numerical Simulation of Semi-Solid Die Casting Technology of Bearing Cage

Data-Driven Design of Cast Nickel-Based Superalloy and Precision Forming of Complex Castings

Effect of Solidification Behavior on Microstructures and Mechanical Properties of Ni-Cr-Fe Superalloy Investment Casting

Numerical Analysis of Semi-Solid Die-Casting Automobile Part Based on the Thermo-Visco-Plastic Constitutive Relation

Macro and Micro Modeling on Conventional and Unidirectionally Solidified Investment Castings

Numerical Simulation of Solidification Process on Single Crystal Ni-Based Superalloy Investment Castings

Integrated Simulation of Castings Deformation during Casting and Heat Treatment Processes

Numerical modeling and simulation of water cooling-controlled solidification for aluminum alloy investment casting