Abstract:In this dissertation, the relationships between structure-mechanical properties-deformation mechanisms in face-centered cubic (FCC) and body-centered cubic (BCC) metallic nanowires have been studied using in situ TEM nanomechanical testing. It is well known that smaller is stronger and the widely-observed size effect is believed to arise from dislocation interactions inside nanocrystals. However, the interaction mechanisms in small-volume nanocrystals remain unexplored. Here, it was found that surface-nucleated dislocations can strongly interact inside the confined volume of Au nanowires, which led to a new type of dislocation-originated stacking fault tetrahedra (SFT), at variance to the widely-believed vacancy-originated SFT. The atomic-scale processes of nucleation, migration and annihilation of dislocation-originated SFT were revealed, shedding new light onto the strain hardening and size effect in small-volume materials. Although nanoscale twinning is an effective mean to enhance the strength of metals, twin-size effect on the deformation and failure of nanotwinned metals remains largely unexplored, especially at the minimum twin size. Here, a new type of size effect in nanotwinned Au nanowires is presented. As twin size reaches the angstrom-scale, Au nanowires exhibit a remarkable ductile-to-brittle transition that is governed by the heterogeneous-to-homogeneous dislocation nucleation transition. Quantitative measurements show that approaching such a nanotwin size limit gives rise to the ultra-high strength in Au nanowires, close to the ideal strength limit of perfect Au. Twinning is a fundamental deformation mode that competes against dislocation slip in crystals. At the nanoscale, higher stresses are required for plastic deformation than that in bulk, which favors twinning over dislocation slip. Indeed, deformation twinning has been well-documented in FCC nanocrystals. However, it remains unexplored in BCC nanostructures. Here, it shows that twinning is the dominant deformation mode in BCC-tungsten nanocrystals. A competition between twinning and dislocation slip occurs when changing the loading orientations, attributed to the defect growth controlled plasticity in BCC nanocrystals. Several important commonalities and differences in FCC and BCC nanocrystals deforming at nanoscale are further proposed. The results from this dissertation advance fundamental understanding of plastic deformation in a broad class of metals and alloys, and are of technological importance for degradation control and future design of ultra-strength nanomaterials.

Influences of grain size and twin boundary on the tensile properties of nanocrystalline face-centered cubic Cu50Ni50 alloy

Modeling Grain Size Dependent Optimal Twin Spacing for Achieving Ultimate High Strength and Related High Ductility in Nanotwinned Metals

Numerical investigation of fracture behavior of nanostructured Cu with bimodal grain size distribution

Tuning the Strength-Ductility Synergy of Nanograined Cu Through Nanotwin Volume Fraction

Two softening stages in nanotwinned Cu

Size-Dependent Dislocation-Twin Interactions

In Situ TEM Study on the Nanomechanical Behaviors of Metallic Nanowires

The Direct and Indirect Effects of Nanotwin Volume Fraction on the Strength and Ductility of Coarse-Grained Metals

A Constitutive Description of the Yield Strength and Strain Hardening Behaviors of Nano-Twinned Metals

Size Dependence and Associated Formation Mechanism of Multiple-Fold Annealing Twins in Nanocrystalline Cu

Delay of inverse Hall-Petch relationship of nanocrystalline Cu by modifying grain boundaries with coherent twins

Mechanical Behavior of Nanotwinned Cu–Ag Alloys with Solute Atomic Gradient Analysis Under the Influence of Twinning Spacing

Quantifying the influence of grain boundary activities on Hall-Petch relation in nanocrystalline Cu by using phase field and atomistic simulations

Molecular Dynamics Study on the Nano-Void Growth and Coalescence at Grain Boundary

Anisotropic Mechanical Properties and Deformation Mechanisms of Nanotwinned Ni and Ni Alloys With Extremely Fine Twin Boundary Spacings

Effects of Grain Size and Shape on Mechanical Properties of Nanocrystalline Copper Investigated by Molecular Dynamics

Probing Mechanical Properties of Nanostructured Materials Via Large Scale Molecular Dynamics Simulations

Molecular dynamics study on the grain boundary dislocation source in nanocrystalline copper under tensile loading

Analysis of the Twin Spacing and Grain Size Effects on Mechanical Properties in Hierarchically Nanotwinned Face-Centered Cubic Metals Based on A Mechanism-Based Plasticity Model

Study on the factors influencing the mechanical properties of bimodal nanotwinned Cu-Ag alloys

Effect of Loading Method, Temperature, and Twin Defects on the Mechanical Behavior of Nanocrystalline Ni with Gradient Spacing Twin Structure