Abstract:In this dissertation, the relationships between structure-mechanical properties-deformation mechanisms in face-centered cubic (FCC) and body-centered cubic (BCC) metallic nanowires have been studied using in situ TEM nanomechanical testing. It is well known that smaller is stronger and the widely-observed size effect is believed to arise from dislocation interactions inside nanocrystals. However, the interaction mechanisms in small-volume nanocrystals remain unexplored. Here, it was found that surface-nucleated dislocations can strongly interact inside the confined volume of Au nanowires, which led to a new type of dislocation-originated stacking fault tetrahedra (SFT), at variance to the widely-believed vacancy-originated SFT. The atomic-scale processes of nucleation, migration and annihilation of dislocation-originated SFT were revealed, shedding new light onto the strain hardening and size effect in small-volume materials. Although nanoscale twinning is an effective mean to enhance the strength of metals, twin-size effect on the deformation and failure of nanotwinned metals remains largely unexplored, especially at the minimum twin size. Here, a new type of size effect in nanotwinned Au nanowires is presented. As twin size reaches the angstrom-scale, Au nanowires exhibit a remarkable ductile-to-brittle transition that is governed by the heterogeneous-to-homogeneous dislocation nucleation transition. Quantitative measurements show that approaching such a nanotwin size limit gives rise to the ultra-high strength in Au nanowires, close to the ideal strength limit of perfect Au. Twinning is a fundamental deformation mode that competes against dislocation slip in crystals. At the nanoscale, higher stresses are required for plastic deformation than that in bulk, which favors twinning over dislocation slip. Indeed, deformation twinning has been well-documented in FCC nanocrystals. However, it remains unexplored in BCC nanostructures. Here, it shows that twinning is the dominant deformation mode in BCC-tungsten nanocrystals. A competition between twinning and dislocation slip occurs when changing the loading orientations, attributed to the defect growth controlled plasticity in BCC nanocrystals. Several important commonalities and differences in FCC and BCC nanocrystals deforming at nanoscale are further proposed. The results from this dissertation advance fundamental understanding of plastic deformation in a broad class of metals and alloys, and are of technological importance for degradation control and future design of ultra-strength nanomaterials.

Study on the factors influencing the mechanical properties of bimodal nanotwinned Cu-Ag alloys

Prediction of Mechanical Properties in Bimodal Nanotwinned Metals with a Composite Structure

Modeling Grain Size Dependent Optimal Twin Spacing for Achieving Ultimate High Strength and Related High Ductility in Nanotwinned Metals

Microstructure‐Property Relations in the Tensile Behavior of Bimodal Nanostructured Metals

Numerical investigation of fracture behavior of nanostructured Cu with bimodal grain size distribution

Computer Simulation of Strength and Ductility of Nanotwin-Strengthened Coarse-Grained Metals

In Situ TEM Study on the Nanomechanical Behaviors of Metallic Nanowires

Tuning the Strength-Ductility Synergy of Nanograined Cu Through Nanotwin Volume Fraction

Atomistic and Theoretical Insights on Nanoprecipitates-Controlled Strengthening Behavior for Optimum Mechanical Performance in Nanotwinned NiCoCr Alloys

Simulating Size and Volume Fraction-Dependent Strength and Ductility of Nanotwinned Composite Copper

Micromechanical simulation of fracture behavior of bimodal nanostructured metals

Strength and Ductility of Bi‐Modal Cu

Plastic Anisotropy and Associated Deformation Mechanisms in Nanotwinned Metals

Analysis of the Twin Spacing and Grain Size Effects on Mechanical Properties in Hierarchically Nanotwinned Face-Centered Cubic Metals Based on A Mechanism-Based Plasticity Model

Twinning-governed plastic deformation in a thin film of body-centred cubic nanocrystalline ternary alloys at low temperature

Effects of twin orientation and spacing on the mechanical properties of Cu nanowires

Simulation Study on the Mechanical Behavior of Copper–Silver Alloy with Twinning-Induced Gradient Segregation

Anisotropic Mechanical Properties and Deformation Mechanisms of Nanotwinned Ni and Ni Alloys With Extremely Fine Twin Boundary Spacings

The tensile behaviors of Ag-Cu alloys with different Cu contents: Molecular dynamics simulations study

Plastic deformation mechanism in nanotwinned metals: An insight from molecular dynamics and mechanistic modeling

Mechanical Behavior of Nanotwinned Cu–Ag Alloys with Solute Atomic Gradient Analysis Under the Influence of Twinning Spacing