Abstract:In this dissertation, the relationships between structure-mechanical properties-deformation mechanisms in face-centered cubic (FCC) and body-centered cubic (BCC) metallic nanowires have been studied using in situ TEM nanomechanical testing. It is well known that smaller is stronger and the widely-observed size effect is believed to arise from dislocation interactions inside nanocrystals. However, the interaction mechanisms in small-volume nanocrystals remain unexplored. Here, it was found that surface-nucleated dislocations can strongly interact inside the confined volume of Au nanowires, which led to a new type of dislocation-originated stacking fault tetrahedra (SFT), at variance to the widely-believed vacancy-originated SFT. The atomic-scale processes of nucleation, migration and annihilation of dislocation-originated SFT were revealed, shedding new light onto the strain hardening and size effect in small-volume materials. Although nanoscale twinning is an effective mean to enhance the strength of metals, twin-size effect on the deformation and failure of nanotwinned metals remains largely unexplored, especially at the minimum twin size. Here, a new type of size effect in nanotwinned Au nanowires is presented. As twin size reaches the angstrom-scale, Au nanowires exhibit a remarkable ductile-to-brittle transition that is governed by the heterogeneous-to-homogeneous dislocation nucleation transition. Quantitative measurements show that approaching such a nanotwin size limit gives rise to the ultra-high strength in Au nanowires, close to the ideal strength limit of perfect Au. Twinning is a fundamental deformation mode that competes against dislocation slip in crystals. At the nanoscale, higher stresses are required for plastic deformation than that in bulk, which favors twinning over dislocation slip. Indeed, deformation twinning has been well-documented in FCC nanocrystals. However, it remains unexplored in BCC nanostructures. Here, it shows that twinning is the dominant deformation mode in BCC-tungsten nanocrystals. A competition between twinning and dislocation slip occurs when changing the loading orientations, attributed to the defect growth controlled plasticity in BCC nanocrystals. Several important commonalities and differences in FCC and BCC nanocrystals deforming at nanoscale are further proposed. The results from this dissertation advance fundamental understanding of plastic deformation in a broad class of metals and alloys, and are of technological importance for degradation control and future design of ultra-strength nanomaterials.

Plastic Anisotropy and Associated Deformation Mechanisms in Nanotwinned Metals

Modeling Grain Size Dependent Optimal Twin Spacing for Achieving Ultimate High Strength and Related High Ductility in Nanotwinned Metals

Size-Dependent Dislocation-Twin Interactions

Modeling the Strain Rate-Dependent Constitutive Behavior in Nanotwinned Polycrystalline Metals

Plastic deformation mechanism in nanotwinned metals: An insight from molecular dynamics and mechanistic modeling

In Situ TEM Study on the Nanomechanical Behaviors of Metallic Nanowires

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Bending-induced Deformation Twinning in Body-Centered Cubic Tungsten Nanowires

Prediction of Mechanical Properties in Bimodal Nanotwinned Metals with a Composite Structure

Molecular dynamics simulation on mechanisms of plastic anisotropy in nanotwinned polycrystalline copper with {111} texture during tensile deformation

Atomistic investigation on the anisotropic elastic and plastic responses of nanotwinned metals

Deformation mechanisms in nanotwinned metal nanopillars

Anisotropic Mechanical Properties and Deformation Mechanisms of Nanotwinned Ni and Ni Alloys With Extremely Fine Twin Boundary Spacings

A Constitutive Description of the Yield Strength and Strain Hardening Behaviors of Nano-Twinned Metals

Orientation- and Microstructure-Dependent Deformation in Metal Nanowires under Bending

Analysis of the Twin Spacing and Grain Size Effects on Mechanical Properties in Hierarchically Nanotwinned Face-Centered Cubic Metals Based on A Mechanism-Based Plasticity Model

Physically Based Modeling of Cyclic Plasticity for Highly Oriented Nanotwinned Metals

Influence of load orientations with respect to twin boundaries on the deformation behaviors of high-entropy alloy nanocrystals

Unveiling orientation dependence of anisotropic plasticity in polycrystalline copper by nanoindentation

Plasticity and Ultra-Low Stress Induced Twin Boundary Migration in Nanotwinned Cu by in Situ Nanoindentation Studies