Abstract:Metal–ceramic nanocomposites exhibit exceptional mechanical properties with a combination of high strength, toughness, and hardness that are not achievable in monolithic metals or ceramics, which make them valuable for applications in fields such as the aerospace and automotive industries. In this study, interpenetrating nanocomposites of three-dimensionally ordered macroporous (3DOM) tungsten–silicon oxycarbide (W–SiOC) were prepared, and their mechanical properties were investigated. In these nanocomposites, the crystalline tungsten and amorphous silicon oxycarbide phases both form continuous and interpenetrating networks, with some discrete free carbon nanodomains. The W–SiOC material inherits the periodic structure from its 3DOM W matrix, and this periodic structure can be maintained up to 1000 °C. In situ SEM micropillar compression tests demonstrated that the 3DOM W–SiOC material could sustain a maximum average stress of 1.1 GPa, a factor of 22 greater than that of the 3DOM W matrix, resulting in a specific strength of 640 MPa/(Mg/m<sup>3</sup>) at 30 °C. Deformation behavior of the developed 3DOM nanocomposite in a wide temperature range (30–575 °C) was investigated. The deformation mode of 3DOM W–SiOC exhibited a transition from fracture-dominated deformation at low temperatures to plastic deformation above 425 °C.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c06894?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c06894</a>.Additional details on materials synthesis, methods for analysis of porosity and mechanical data corrections, SEM images, XRD patterns, elemental analyses, N<sub>2</sub> sorption data, IR and Raman spectra, and strain maps (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c06894/suppl_file/am1c06894_si_001.pdf">PDF</a>)In situ compression deformation process at 30 °C (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c06894/suppl_file/am1c06894_si_002.mp4">MP4</a>)In situ compression deformation process at 225 °C (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c06894/suppl_file/am1c06894_si_003.mp4">MP4</a>)In situ compression deformation process at 425 °C (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c06894/suppl_file/am1c06894_si_004.mp4">MP4</a>)In situ compression deformation process at 575 °C (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c06894/suppl_file/am1c06894_si_005.mp4">MP4</a>)This article has not yet been cited by other publications.

Mechanical, electrical properties and microstructures of combinatorial Ni-Mo-W alloy films

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Structure and Properties of Electrocodeposited Cu-Al2o3 Nanocomposite Thin Films

Microstructural, Electrical, and Tribomechanical Properties of Mo-W-C Nanocomposite Films

Nanotwinned Metal MEMS Films with Unprecedented Strength and Stability

Effects of Alloying on the Microstructures and Mechanical Property of Nb-Mo-Si Based in Situ Composites

Effect of Tungsten on Microstructure and Mechanical Properties of Novel NiMnCrMoWx High-Entropy Alloys Developed by Mechanical Alloying

Heterogeneous Morphologies and Hardness of Co-Sputtered Thin Films of Concentrated Cu-Mo-W Alloys

Microstructure and Mechanical Properties of WMoCu Alloy Doped with Different Sized Mo Particles

Combined experimental and computational investigation of precipitation behaviour and mechanical properties in a novel Cu–Ni–Si–Co alloy: effect of solution treatment temperature

Alloying Effects on the Microstructure and Mechanical Properties of Nanocrystalline Cu-based Alloyed Thin Films: Miscible Cu-Ti Vs Immiscible Cu-Mo

Tailoring the Structure of Al50Mo50 Alloy Films Towards Realizing the Well Match Between Mechanical and Electrical Performance by Controlling the Growth Mode

Electrodepositing amorphous Ni-W alloys for MEMS

Microstructures and mechanical properties of FeCoNi(MoW) high-entropy alloys

Synergetic effects of complex additions of Mo and Ni on the phase transformation behavior and mechanical properties of austenitic lightweight steels

Development and Characterization of a Novel Fine-Grained W–Ni–Mn–Mo Alloys with La2O3 Addition Prepared Via Low-Temperature Sintering

Microstructure and Properties of Electrodeposited Nanocrystalline Ni-Co-Fe Coatings

Structure, morphology and magnetic performance of (Fe 65 Co 35 )x@(Ni 0.5 Zn 0.5 Fe 2 O 4 ) 100-x nanocomposite thin films

Stable Nanocrystalline NbMoTaW High Entropy Alloy Thin Films with Excellent Mechanical and Electrical Properties

Phase transformation and thermal stability of mechanically alloyed W–Ni–Fe composite materials

3D Periodic and Interpenetrating Tungsten–Silicon Oxycarbide Nanocomposites Designed for Mechanical Robustness