Abstract:Finite element modeling for designing and optimizing lightweight titanium aerospace components requires advanced simulation tools with adequate material modeling. In this sense, a hybrid strategy is proposed in this work to identify the parameters of the Johnson–Cook plasticity and damage laws using a combined direct-inverse method. A direct calibration method for plasticity law is applied based on the literature-reported data of strain-stress curves from experimental tensile tests at different temperatures and strain rates. The triaxiliaty-dependent fracture parameters of the Johnson–Cook damage law at reference conditions of strain rate and temperature (d1, d2, and d3) are calibrated with the direct method based on new data of experimental evolution of computed average fracture strain with the average stress triaxiality. The validation is performed with numerical results from an accurate micromechanics-based Ti64 model. The inverse calibration method is used to determine the strain rate and temperature-dependent damage parameters (d4 and d5) through large strain simulations of uniaxial tensile tests. The numerical results, including average strain and necking profile at fracture, are then utilized to calculate stress triaxiality by the Bridgman criterion for adjusting parameters d4 and d5. The calibrated model yields a 2.1% error for plasticity and 3.4% for fracture predictions. The experimental and simulated load-bearing capacity using the micromechanics damage model differed by only 1%. This demonstrates that the SC11–TNT model of Ti64 is reliable for identifying the Johnson–Cook damage law through the accurate use of inverse methods. The hybrid calibration strategy demonstrates the potential capability of the identified Johnson–Cook model to accurately predict the design load-carrying capacity of Ti64 aerospace components under different deformation rates and temperatures while accounting for material damage effects.

A simplified Johnson-Cook model of TC4T for aeroengine foreign object damage prediction

Parametric Analysis and Improvement of the Johnson-Cook Model for a TC4 Titanium Alloy

Effects of Different Materials on Residual Stress Fields of Blade Damaged by Foreign Objects

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

A modified nonlinear cumulative damage model for combined high and low cycle fatigue life prediction

A Modified Johnson–Cook Constitutive Model and Its Application to High Speed Machining of 7050-T7451 Aluminum Alloy

Comprehensive effect of simulated centrifugal force on characteristics of different extent notch-type foreign object damages

Experimental characterization and numerical modeling on the external impacting of high-speed railway axle EA4T steel

A modified damage accumulation model for life prediction of aero‐engine materials under combined high and low cycle fatigue loading

Investigations on the Johnson-Cook Constitutive and Damage-Fracture Model Parameters of a Q345C Steel

Modification of strain rate strengthening coefficient for Johnson-Cook constitutive model of Ti6Al4V alloy

Numerical analysis of Johnson-Cook damage model parameters effects on the cutting simulation of AISI 1045

Numerical Prediction and Experimental Investigation of Ductile Damage During Cold Upsetting of TC16 Titanium Alloy for Manufacturing Fasteners

A Joint Johnson-Cook-TANH Constitutive Law for Modeling Saw-Tooth Chip Formation of Ti-6AL-4V Based on an Improved Smoothed Particle Hydrodynamics Method

A Combined High and Low Cycle Fatigue Model for Life Prediction of Turbine Blades

Finite element simulation of residual stress in machining of Ti-6Al-4V with a microstructural consideration

Research on the Damage Characteristics of Ti‐6Al‐4V Simulation Blades Subjected to Foreign Object Damage

A Combined Experimental and Numerical Calibration Approach for Modeling the Performance of Aerospace-Grade Titanium Alloy Products

Cutting modeling using cohesive zone concept of titanium/CFRP composite stacks

Inverse determination of improved constitutive equation for cutting titanium alloy Ti-6Al-4V based on finite element analysis

Prediction of high-cycle fatigue strength in a Ti-17 alloy blade after foreign object damage