Abstract:Resonance is an important failure mechanism that arises when a periodic force acts at a frequency corresponding to a blade natural frequency. If the damping is inadequate for absorption of the periodic input energy, amplitude and stresses grow until failure occurs by overstress or by propagation of fatigue crack. A complex and irregular distribution of minor indentations covers the surface, including leading edge impacts. The damage caused by foreign objects often in the form of a geometric discontinuity like a notch. However the presence of residual stress and sub-structural damage in regions adjacent to the notch prohibit the use of simple notch analyses. FE analysis is used to estimate stress concentration effect of the geometry of the notch. For this purpose, the compressor aerofoil blade is idealized into simple rectangular cantilever plate for FEM study. The complexity of the problem is reduced to a simplex problem by assuming the aerofoil section to a flat rectangular plate. Because of the nonpresence of the aerofoil section, analysis is so simple for finding the stress concentration effect of the geometrical notch made. To analyze the stress concentration effect of foreign object damage (FOD), different notches are made by varying the notch dimensions viz., depth, radius of the notch and the location of the notch on the trailing edge of the rectangular plate. Foreign object damaged compressor blades with nicks, dents and cracks can be ground into the smooth curved cutouts to reduce the stress intensification and stress concentration with a high speed grinding wheel. In doing so, depending on the extent and type of damage, designer has a requirement to estimate size and shape of the cut-out to be made on the aerofoil that generates the known SCF. With the estimated values of SCF for different geometry of cut using FEM further a modal analysis has been conducted to assess the variation of frequencies for different geometry of cut-outs with known values of SCF to aster the correctness of the solution, the finite element analysis is carried out on a rectangular cantilever plate for which literature is available. Further the study is extended to an idealized problem of Abstract: Modal analysis has been important to the designers and operators since the inception of the Turbo machinery. Blades typically fail because of low-cycle fatigue (LCF), and high-cycle fatigue (HCF), environmental attack, Creep, Oxidation, erosion, embrittlement. In the present work the turbine blade is modeled and analyzed using finite element method the eigen value extraction for flexural and torsional modes is obtained. Foreign object damage is simulated by considering a circular crack along the leading edge of the blade. It was found that the stretching induced by the centrifugal inertia force due to the rotational motion of the blades was the cause for the increment of the bending stiffness of the structure. This resulted in maximum operational Vonmises stresses; the object is to provide understanding and information for designers to improve the life and efficiency of gas turbines.

Comprehensive effect of simulated centrifugal force on characteristics of different extent notch-type foreign object damages

Fatigue Crack Propagation Analysis in an Aero-Engine Turbine Disc Using Computational Methods and Spin Test

Effects of Different Materials on Residual Stress Fields of Blade Damaged by Foreign Objects

Effect of Residual Stress Induced by Different Cooling Methods in Heat Treatment on the Fatigue Crack Propagation Behaviour of GH4169 Disc

Foreign object damage characteristics and their effects on high cycle fatigue property of Ni‐based superalloy GH4169

Quantitative Study of High-Frequency Fatigue Hole-Edge Stresses in Nickel-Based Single-Crystal Superalloy

Research on the Damage Characteristics of Ti‐6Al‐4V Simulation Blades Subjected to Foreign Object Damage

A simplified Johnson-Cook model of TC4T for aeroengine foreign object damage prediction

Fatigue Notch Strengthening Effect of Nickel-based Single Crystal Superalloys under Different Stress Ratios

Fod Simulation for Ceramic Turbine Blades

Study of the Effect of a Blade Tip Notch Damage on the Aerodynamic Performance of Transonic Compressor Rotors

Experimental Characterization of Competition of Surface and Internal Damage in Very High Cycle Fatigue Regime

Effects of notch width and loading rate on the dynamic mode II fracture toughness of Ti-6Al-4V

Modeling And Analysis Of Flexural And Torsional Modes Of Gas Turbine Blades Considering The Foreign Object Damage

Experimental and Analytical Investigation for Fatigue Crack Growth Characteristics of an Aero-Engine Fan Disc

Effect of elliptical notches on mechanical response and progressive damage of FMLs under tensile loading

Micro-notch Size Effect on Small Fatigue Crack Propagation of Nickel-Based Superalloy GH4169

Notch insensitivity in fatigue failure of chopped carbon fiber chip-reinforced composites using experimental and computational analysis

Prediction of high-cycle fatigue strength in a Ti-17 alloy blade after foreign object damage

Fatigue Damage Evaluation of Compressor Blade Based on Nonlinear Ultrasonic Nondestructive Testing

Investigation on the influences of clearance and notch-sensitivity on a new type of metal-bar non-chip fine-cropping system