Abstract:This paper mainly investigates the aerodynamic effect of two different average sizes and three specific nonaxisymmetric rotor tip clearance arrangements on the overall performance and loss mechanism of a four-stage low-speed research compressor (LSRC) at Shanghai Jiao Tong University. The stage was modeled for the steady simulations as a seventh entire annulus computation domain of the inlet vane and the first stage rotor row. The numerical method was validated using experimental data on the radial profiles of total pressure and flow angle at the rotor outlet. Results illustrate that a size increase (from 1.2% span to 2.3% span) in uniform clearance layout will bring adverse effects. The specific degradation in isentropic efficiency is 1.11% and 1.77% at the design and near stall points, respectively. The nonaxisymmetric rotor tip clearance arrangement significantly increases the stall margin by 25%-31% relative to the uniform layout, and the benefit is more pronounced in the case of a larger average clearance size of 48%-57%. However, there are no visible changes in the global performance characteristics. The zigzag-distributed clearance layout has a better performance impact than the other two linearly arranged schemes. Detailed analyses based on the streamwise and spanwise efficiency deviation were carried out to interpret the aerodynamic improvement. Moreover, the differentiated distribution of aerodynamics and specific flow behaviors at the rotor tip were investigated in detail over each rotor passage. Circumferentially averaged performance and radial profiles were performed. Because of the nonaxisymmetric layout, the inlet mass flow and incidence were redistributed in both radial and circumferential directions, further causing a significant alleviation of the blockage arising from the tip leakage flow, especially the region at the first 0.5 axial chord and above 80% span. The loss caused by the nonaxisymmetric tip clearance included not only the leakage flow loss, but also the interference between the leakage flow and the incoming main flow, or the low-energy fluid in the corner region of the casing, and even the loss on the suction surface of the adjacent rotor blade.

Study of the Effect of a Blade Tip Notch Damage on the Aerodynamic Performance of Transonic Compressor Rotors

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

Numerical Investigation of Blade Tip Winglet on Flow Structure in a High Loading Transonic Rotor

Investigation on the Effects of Winglet Geometry in a High Loading Compressor Rotor

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Effects of Tip Leakage Flow on Aerodynamic Performance of a Low-Reaction Transonic Rotor

The Influence of Blade Root Fillet and Blade Tip Clearance on the Aerodynamic Performance of a Transonic Axial Compressor

Overall Performance and Loss Analysis of a Low-Speed Research Compressor with Different Nonaxisymmetric Tip Clearance Layouts

Impact of Defective Blades on Aerodynamic Performance of Transonic Compressor Rotor

Attenuation of the Tip-Clearance Flow in a Pump-Jet Propulsor by Thickening and Raking the Tips of Rotor Blades: A Numerical Study

Analysis of Overall Aerodynamic Performance of Axial-Flow Compressor with Attenuated Blade Tip

Numerical investigation of the unsteady tip leakage flow and rotating stall inception in a transonic compressor

Comprehensive effect of simulated centrifugal force on characteristics of different extent notch-type foreign object damages

Effect of tip clearance dimension on unsteadiness in a low-reaction aspirated transonic compressor rotor

Study on the Effect of Rotor Tip Fillet Edge in Axial Compressor

Evaluation of the free-windmilling rotational speed of a damaged wide-chord fan rotor

Effect of Tip Clearance Size on the Performance of a Low-Reaction Transonic Axial Compressor Rotor

Airworthiness Compliance Research of Aerodynamic Performance on Bird Strike Damaged Fan Blades

Aerodynamic Performance Evaluation of Subsonic Compressor Cascade Blade with Leading-Edge Damage

Investigation on the Interaction of Tip Leakage Flow/ Shock Wave/ Boundary Layer in a Transonic Compressor Stage

The Influence of Tip Leakage Flow on Flowfields in A Highly Loaded Transonic Rotor with Forward Sweep