Abstract:For axial turbines, tip leakage vortex and passage vortex flow are responsible for a large part of the aerodynamic loss. To pursue higher turbine efficiency, many methods are undertaken to eliminate the tip leakage loss. In this work, by experimental and numerical methods, novel wave-shaped tip-shroud contours on the unshrouded turbine cascade were proposed. In a low-speed large-scale linear turbine cascade facility, a traditional flat tip was first conducted to comprehensively validate the numerical tool, especially the inlet conditions and the total pressure loss due to the tip leakage loss. The numerical settings were kept the same as the experimental facility. It achieved a satisfactory agreement between the CFD and experiments. It was found that in a flat tip case, a large, integral tip leakage vortex structure was identified and responded to the aerodynamic loss within the tip leakage core. Then a series of novel wave-shaped tip-shroud contours were considered in the current turbine cascade. The overtip flow exited the suction side tip gap, and the peak mass flow rate was concentrated around the troughs of the wave tip. Several small-sized, but stronger-vorticity-magnitude vortex structures were identified. By breaking down a large, integral vortex structure into several smaller-scale vortices, the vortex evolution was beneficial for the turbine efficiency. Although a slight enhancement of passage vortex was identified, the overall loss reduction of 3.0% was achieved by reducing the tip leakage loss, which dominated the loss contribution. According to the real working condition, axial displacement for the blade was considered. Within the current scope, the maximum reduction of tip leakage loss coefficient was reduced by 14.6% compared to the flat tip case. It was mainly contributed by the smaller contraction coefficient within the tip gap, which reduced the overtip leakage mass flow. Meanwhile, the vena contracta within the tip gap was altered, as well as static pressure distribution on the tip surface. As a result, the minimum static pressure was re-distributed at the throat of the tip gap. It was proven that this novel wave-shaped tip-shroud contour was an efficient way to improve the aerodynamic performance at a larger tip gap.(c) 2022 Elsevier Ltd. All rights reserved.

Numerical Research On Effects Of Shroud Contraction On Tip Leakage Flow And Overall Performance Of Axial Compressors

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

Multi-Objective Design Optimization of a Transonic Compressor Rotor Using an Adjoint Equation Method

Multipoint Design Optimization of a Transonic Compressor Blade by Using an Adjoint Method

Performance Sensitivity Analysis and Aerodynamic Optimization of Compressor Cascades by a Turbulence Adjoint Method

Investigation on the Interaction of Tip Leakage Flow/ Shock Wave/ Boundary Layer in a Transonic Compressor Stage

Numerical Investigation of Influence of Rotor-Rotor Gap on Performances of Contra-Rotating Axial Flow Pump

Effect of Meridional Shape on Performance of Axial-Flow Fan

Analysis of Overall Aerodynamic Performance of Axial-Flow Compressor with Attenuated Blade Tip

Numerical investigation on the influence of nonuniform tip clearance on rotor tip-clearance flow field structure

Comparative investigation of tip leakage flow and its effect on stage performance in shrouded and unshrouded turbines

Leakage Flow Mixing in Shrouded Axial Turbines and Its Control Strategies Using Casing Optimization

Novel Wave-Shaped Tip-Shroud Contours Towards Reducing Turbine Leakage Loss

Experimental investigation of pressure losses in a co-rotating cavity with radial inflow employing tubed vortex reducers with varied nozzles

Mechanism Analysis of the Influence of Blade Thickness Deviation on The Performance of Axial Flow Compressor

Optimization of Rotor Tip Cavity Shapes for Mitigating Aerodynamic Tip Leakage Losses

Three-Dimensional Optimization of Blade Lean and Sweep for an Axial Compressor to Improve the Engine Performance

Three-dimensional optimization of squealer-tip for a transonic axial-flow compressor rotor blade

New approach of inverse design of transonic compressor rotor blade via prescribed isentropic Mach distributions without modification of governing equations

Optimization and Numerical Investigation of Combined Design of Blade and Endwall on Rotor 67

Mechanism of affecting the performance and internal flow field of an axial flow subsonic compressor with self-recirculation casing treatment