Abstract:For axial turbines, tip leakage vortex and passage vortex flow are responsible for a large part of the aerodynamic loss. To pursue higher turbine efficiency, many methods are undertaken to eliminate the tip leakage loss. In this work, by experimental and numerical methods, novel wave-shaped tip-shroud contours on the unshrouded turbine cascade were proposed. In a low-speed large-scale linear turbine cascade facility, a traditional flat tip was first conducted to comprehensively validate the numerical tool, especially the inlet conditions and the total pressure loss due to the tip leakage loss. The numerical settings were kept the same as the experimental facility. It achieved a satisfactory agreement between the CFD and experiments. It was found that in a flat tip case, a large, integral tip leakage vortex structure was identified and responded to the aerodynamic loss within the tip leakage core. Then a series of novel wave-shaped tip-shroud contours were considered in the current turbine cascade. The overtip flow exited the suction side tip gap, and the peak mass flow rate was concentrated around the troughs of the wave tip. Several small-sized, but stronger-vorticity-magnitude vortex structures were identified. By breaking down a large, integral vortex structure into several smaller-scale vortices, the vortex evolution was beneficial for the turbine efficiency. Although a slight enhancement of passage vortex was identified, the overall loss reduction of 3.0% was achieved by reducing the tip leakage loss, which dominated the loss contribution. According to the real working condition, axial displacement for the blade was considered. Within the current scope, the maximum reduction of tip leakage loss coefficient was reduced by 14.6% compared to the flat tip case. It was mainly contributed by the smaller contraction coefficient within the tip gap, which reduced the overtip leakage mass flow. Meanwhile, the vena contracta within the tip gap was altered, as well as static pressure distribution on the tip surface. As a result, the minimum static pressure was re-distributed at the throat of the tip gap. It was proven that this novel wave-shaped tip-shroud contour was an efficient way to improve the aerodynamic performance at a larger tip gap.(c) 2022 Elsevier Ltd. All rights reserved.

Leakage Flow Mixing in Shrouded Axial Turbines and Its Control Strategies Using Casing Optimization

The impact of mainstream ingress on the leakage flow and loss in partial shrouded turbines

Treatment and Optimization of Casing and Blade Tip for Aerodynamic Control of Tip Leakage Flow in a Turbine Cascade

Novel Wave-Shaped Tip-Shroud Contours Towards Reducing Turbine Leakage Loss

Numerical Research On Effects Of Shroud Contraction On Tip Leakage Flow And Overall Performance Of Axial Compressors

Experimental Study of Flow Control on Tip Leakage Flow in Variable Geometry Linear Turbine Cascades with Different Pivot Layouts

Characterizing Shrouded Stator Cavity Flow on the Performance of a Single-Stage Axial Transonic Compressor

Comparative investigation of tip leakage flow and its effect on stage performance in shrouded and unshrouded turbines

Numerical Study of Two Types of Rough Groove in Suppressing the Tip Clearance Cavitation

Hydraulic Optimization and Loss Analyses of a Low Specific-Speed Centrifugal Pump with Variable-Thickness Blades

The Effect Of The Shrouded Rotor Blade Tip Leakage Flow On The Aerodynamic Performance Of A One And Half Turbine Stage

Tip Leakage Flow In Radial Inflow Rotor Of A Microturbine With Varying Blade-Shroud Clearance

Effect of circumferential grooves casing treatment on tip leakage flow and loss in a transonic mixed-flow compressor

Numerical investigations on leakage performance and flow mechanism of spiral groove seal for shrouded blade in axial turbine

Research Progress of Leakage Flows in Flow Passage of Axial Turbomachinery and Their Flow Controlling Technology

Optimization of Rotor Tip Cavity Shapes for Mitigating Aerodynamic Tip Leakage Losses

Experimental and Numerical Investigation on Turbine Flow Control Through Integrating Endwall Contouring with Section Profiling at Different Mach Numbers

Effect Of Relative Movement Between The Shroud And Blade On Tip Leakage Flow Characteristics

Controlling Leakage Flows Over A Rotor Blade Tip Using Air-Curtain Injection: Part Ii - Rotor Casing Film Cooling

Analysis of Impact of a Novel Combined Casing Treatment on Flow Characteristics and Performance of a Transonic Compressor

EFFECTS OF THE TIP LEAKAGE FLOWS OF THE SHROUDED ROTOR BLADE ON THE AERODYNAMIC PERFORMANCE OF THE TURBINE STAGE