Stability characteristics and control of an ultra-highly loaded transonic compressor rotor in compressed air energy storage system
Shengli Ding,Shaowen Chen,Zehao Li
DOI: https://doi.org/10.1016/j.est.2024.114962
IF: 9.4
2024-12-12
Journal of Energy Storage
Abstract:The compressor is a crucial component of compressed air energy storage systems, typically operating under off-design conditions to quickly respond to changes in grid demand. The insufficient stability margin of highly loaded compressors poses a threat to the safe and reliable operation of the systems. This study investigates the flow instability characteristics in an ultra-highly loaded, low-reaction transonic compressor rotor. Through the analysis of transient vortex evolution structures and spectral insights, the complex interplay between tip leakage vortex (TLV) breakdown, tip secondary vortex, and tip loading is elucidated. This interplay creates a self-sustaining closed-loop feedback process, resulting in periodic oscillations in the tip leakage flow (TLF). To mitigate this instability, a passive flow control strategy termed self-excited bleed (SEB) is employed. The results indicate that a discrete arrangement of SEB is necessary. Adjusting the circumferential coverage alters the SEB flow rate, with approximately 5 % flow rate maximizing stabilization. Increasing the coverage results in higher peak efficiency losses, making a 60 % coverage rate the optimal balance between stability enhancement and efficiency. SEB effectively suppresses the shock-TLV interaction by reducing local loading near the leading edge, inhibiting shock detachment, and mitigating double-leakage flow, thus disrupting the original unsteady feedback loop and eliminating TLF instability oscillations. However, SEB also intensifies the radial outward migration of the suction surface boundary layer, increasing blockage at the rear of the tip passage. The technique's efficacy and adverse effects intensify with increasing coverage. A blockage parameter is introduced to quantify tip blockage, demonstrating that when the SEB flow rate reaches 5 %, further increasing the coverage to enhance flow rate leads to a sharp increase in blockage downstream of the mid-chord, thereby reducing the stall margin.
energy & fuels