Abstract:Wet compression technology is an economic and effective approach to improve the performance of gas turbine. In the process of wet compression, the gas turbine engine will ingest a certain amount of water, which can influence the overall performance of the engine. Thermodynamic process and performance of compressor are influenced significantly by heat and mass transfer of the injected water droplets.This study is a new research of investigating theoretically the water droplets effects on the heat and mass transfer characteristics. It focuses on the aerodynamic and thermodynamic effects of the two-phase flow in the compressor stage. The application of Computational Fluid Dynamics (CFD) is the basic method to examine the details of the flow in an axial compressor stage and how it is affected by the presence of water, especially by the water droplets. The computation of water droplets characteristics, are provided by a simulation model of the code named CFX. Considering the change in aerodynamics and thermodynamics feature due to the water droplets, the compressor stage's performance variations are analyzed. The movement and the evaporation of the water droplets in a compressor stage are simulated and analyzed by using unsteady numerical methods under different water injecting conditions in this paper. The movement characteristics of water droplets in compressor passage are investigated to understand the flow mechanisms responsible for wet compression formation process.The investigation of water droplets in compression can help to understand some phenomenons by using wet compression technology. The flow of water droplets between rotor blades are analyzed by using computational fluid dynamics method. Full coupling between gas and water droplets are adopted, allowing gas and water droplets to affect each other. Many motion parameters of water droplets are researched, such as slip velocity, Weber number and Reynolds number. The forces acting on water droplet are also discussed. Aerodynamic breakup of water droplets and interactions between water droplets and wall are taken into consideration at the same time.The results indicate that: (1) The motion of water droplets in compression areor mainly controlled by drag force. The motion parameters of water droplets changes mostly at the entrance of flow passage between rotor blades, and the turbulence intensity and breakup strength of water droplets reaches their maximum at the entrance. (2) The flow angle of water droplets is bigger than gas in rotor region due to their inertia, which can explain why water droplets have bigger separation degree and are easier to flow toward blade pressure surface. (3) The motion of water droplets in stator region is also important to be investigated for wet compression, and the motion analysis of single water droplets between blades is still needed to be developed, so more investigation will be carried out.

Investigation of Water Film Formation on Blade Surfaces of a Wet Compression Transonic Compressor Rotor

Formation Process of Water Film and Performance Effect on Compressor Stage

Method and Numerical Simulation for Evaluating the Effects of Water Film on the Performance of Low-Speed Axial Compressor

On the Stability of Transonic Compressor with Wet Compression and Blade Tip Water Injection

Heat And Mass Transfer Characteristics Of Water Droplets In Wet Compression Process

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

The Effects of Water Ingestion on the Tip Clearance Flow in Compressor Rotors

Effects of Water Ingestion on the Tip Clearance Flow in Compressor Rotors

Experimental investigation of transient characteristics of mild surge and diffuser rotating stall in a centrifugal compressor with vaned diffuser

Water washing of axial flow compressors: numerical study on the fate of injected droplets

The Influence Of Water Droplets On The Heat And Mass Transfer Of The Wet Compression Of Single Stage Compressor

Evaluation of non-uniform water film behavior on the performance of an axial aeroengine compressor

Numerical study on the three-dimensional flow of water film on the outer surface of the hollow stationary blade

Experimental study and modeling of water film thickness in aero-engine under air–water mist flow

An investigation of the heat transfer characteristics of a droplet impacting a compressor blade

Research on the influence of initial parameters of water droplets on the performance of counter-rotating axial-flow compressor

Investigation on Flat-Fan Spray Characterization in High-Speed Air Coflow for Gas Turbine Online Water Washing Application

Investigation on the Interaction of Tip Leakage Flow/ Shock Wave/ Boundary Layer in a Transonic Compressor Stage

The Effective Positions to Inject Water into the Cascade of Compressor

Numerical investigation of the unsteady tip leakage flow and rotating stall inception in a transonic compressor

Compressor Water Extraction