Abstract:Purpose This study aims to further refine the model, explore the influence of cutting parameters on the machining process, and apply it to practical engineering to improve the efficiency and quality of titanium alloy machining. Design/methodology/approach This paper establishes a comprehensive thermo-mechanical fully coupled orthogonal cutting model. This paper aims to couple the modified Johnson–Cook constitutive model, damage model and contact model to construct a two-dimensional orthogonal cutting thermo-mechanical coupling model for high-speed cutting of Ti6Al4V. The model considers the evolution of microstructures such as plastic deformation, grain dislocation rearrangement, dynamic recrystallization, as well as stress softening and hardening occurring continuously in Ti6Al4V metal during high-speed cutting. Additionally, the model incorporates friction and contact between the tool and the workpiece. It can be used to predict parameters such as cutting process, cutting force, temperature distribution, stress and strain in titanium alloy machining. The study establishes the model and implements corresponding functions by writing Abaqus VUMAT and VFRICTION subroutines. Findings The use of different material constitutive models can significantly impact the prediction of the cutting process. Some models may more accurately describe the mechanical behavior of the material, thus providing more reliable prediction results, while other models may exhibit larger deviations. Compared to the Tanh model, the proposed model achieves a maximum improvement of 8.9% in the prediction of cutting force and a maximum improvement of 20.9% in the prediction of chip morphology parameters. Compared to experiments, the proposed model achieves a minimum prediction error of 2.8% for average cutting force and a minimum error of 0.57% for sawtooth parameters. This study provides a comprehensive theoretical foundation and practical guidance for orthogonal cutting of titanium alloys. The model not only helps engineers and researchers better understand various phenomena in the cutting process but also serves as an important reference for optimizing cutting processes. Originality/value The originality of this research is guaranteed, as it has not been previously published in any journal or publication. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0168/

Inverse determination of improved constitutive equation for cutting titanium alloy Ti-6Al-4V based on finite element analysis

Finite element simulations of Ti6Al4V titanium alloy machining to assess material model parameters of the Johnson-Cook constitutive equation

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Finite Element Simulation Of High-Speed Cutting Alloy Cast Iron

Determination and Verification of the Johnson–Cook Constitutive Model Parameters in the Precision Machining of Ti6Al4V Alloy

Inverse identification of material constitutive parameters based on co-simulation

Subroutine Embedding and Finite Element Simulation of the Improved Constitutive Equation for Ti6Al4V during High-Speed Machining

Mechanism of Saw-Tooth Chip Formation of Titanium Alloy Based on Finite Element Simulation

Finite Element Analysis of Adiabatic Shear Band Formation in Titanium Alloy Cutting Process

A modified parallel-sided shear zone model for determining material constitutive law

On the selection of an empirical material constitutive model for the finite element modeling of Ti6Al4V orthogonal cutting, including the segmented chip formation

Modification of strain rate strengthening coefficient for Johnson-Cook constitutive model of Ti6Al4V alloy

Constitutive Model and Cutting Simulation of Titanium Alloy Ti6Al4V after Heat Treatment

A thermo-mechanical fully coupled model for high-speed machining of Ti6Al4V

Research on Parameter Identification of Johnson–Cook Constitutive Model for TC17 Titanium Alloy Cutting Simulation

A Joint Johnson-Cook-TANH Constitutive Law for Modeling Saw-Tooth Chip Formation of Ti-6AL-4V Based on an Improved Smoothed Particle Hydrodynamics Method

Optimization of Milling Aluminum Alloy 6061-T6 using Modified Johnson-Cook Model

Parameter identification of Johnson-Cook constitutive model based on genetic algorithm and simulation analysis for 304 stainless steel

Modelling orthogonal cutting of Ti-6Al-4 V titanium alloy using a constitutive model considering the state of stress

Inverse Identification of Constitutive Model for GH4198 Based on Genetic–Particle Swarm Algorithm