Abstract:The possibility of the life prediction model for nickel-base single crystal blades has been studied. The fatigue-creep (FC) and thermal fatigue-creep (TMFC) as well as creep experiments have been carried out with different hold time of DD3. The hold time and the frequency as well as the temperature range are the main factors influencing on the life. An emphasis has been put on the micro mechanism of the rupture of creep, FC and TMFC. Two main factors are the voiding and degeneration of the material for the creep, FC and TMFC experiments. There are voids in the fracture surfaces, and size of the voids is dependent on the loading condition. Generally, the rupture mechanism is the same for creep, FC and TMFC. If the loading can be simplified to the working conditions of the turbine blades, i.e. the hold time is at the top temperature and maximum stress, a linear life model is satisfactory to the life prediction of nickel-base single crystal superalloy from the experimental study in this paper. The temperature and the stress level of the nickel-base single crystal (SC)blades are not uniform. To predict the life of SC blades, one should consider the cycles of the temperature and stress as well as the oxidation simultaneously. In the past 30 years, there are many works on the mechanical behavior and description, such as the inelastic constitutive relationships, plastic, fracture, isothermal creep and fatigue and thermal fatigue as well as oxidation [1-3]. There are also special software (program) to analyze the deformation and life of nickel-base single crystal structures, such as blades. In order to apply to the engineering more conveniently, there should be a life prediction model for the blades. The model should not be too complex, but take more influential factors as possible into consideration.

A Combined High and Low Cycle Fatigue Model for Life Prediction of Turbine Blades

A modified nonlinear cumulative damage model for combined high and low cycle fatigue life prediction

A Hybrid Modeling Method of Fatigue Crack Growth for Gas Turbine Blades under Combined High and Low Cycle Fatigue Loadings

Combined High and Low Cycle Fatigue Life Prediction Model Based on Damage Mechanics and Its Application in Determining the Aluminized Location of Turbine Blade

A modified damage accumulation model for life prediction of aero‐engine materials under combined high and low cycle fatigue loading

A Damage Coupled Elastic-Plastic Constitutive Model and Its Application on Low Cycle Fatigue Life Prediction of Turbine Blade

A Combined Low and High Cycle Fatigue Life Prediction Model Considering the Crack Closure Effect of Micro-Defects Based on the Continuous Damage Mechanics

A Miner's rule based fatigue life prediction model for combined high and low cycle fatigue considering loading interaction effect

Multi-axis Low-Cycle Creep/fatigue Life Prediction of High-Pressure Turbine Blades Based on a New Critical Plane Damage Parameter

Probabilistic Fatigue Life Prediction of an Aero-Engine Turbine Shaft

A New Energy-Critical Plane Damage Parameter for Multiaxial Fatigue Life Prediction of Turbine Blades

Multiaxial Fatigue Life Prediction For Turbine Blades Using Finite Element Analysis

Probabilistic-based Combined High and Low Cycle Fatigue Assessment for Turbine Blades Using a Substructure-Based Kriging Surrogate Model

A Practical Nonlinear Damage Accumulation Method to Predict the Life and Crack Propagation of Blade Subjected to Multilevel Cyclic Fatigue Loads

Reliability-based Low-Cycle Fatigue Damage Analysis for Turbine Blade with Thermo-Structural Interaction

Substructure-based distributed collaborative probabilistic analysis method for low-cycle fatigue damage assessment of turbine blade-disk

A nonlinear cumulative fatigue damage life prediction model under combined cycle fatigue loading considering load interaction

A general energy-based model for fatigue life prediction of high-temperature structural materials

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

A Life Prediction Model for Nickel-Base Single Crystal Superalloy DD3

A life prediction method and damage assessment for creep-fatigue combined with high-low cyclic loading