Abstract:These complexes provided stress relief and bridging effects during deformation, thereby increasing ductability without affecting modulus and strength. The presence of core‐shell nanoparticles and long‐chain branching, and the subsequent formation of a network structure, will impede the movement of small gas molecules, improving gas barrier properties. Incorporating inorganic particles is a common approach to preparing polymeric materials with desirable physical properties and processability. However, this often results in increased brittleness, necessitating methods to improve melt strength and toughness. In this study, in situ polymerization was employed to functionalize silica nanoparticles with the silane coupling agent (3‐aminopropyl) triethoxysilane (APTES) as a core. A flexible chain segment, poly(butylene itaconate) (PBI), was then introduced as a "rubbery" intermediate layer, resulting in a core‐shell structure of poly(L‐lactic‐co‐butanediol itaconate) nano‐silica copolymer films (PLBISiO2) with both branched and "rubbery" structures. Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) confirmed the formation of macromolecular chains, with the molecular weight (Mn) of PLBI increasing from 59,638 to 74,306 g/mol. This significant increase supports the "rubbery" core‐shell structure. When 0.5% SiO2 was added, the T5% of the film increased by 40°C, significantly improving thermal stability. Additionally, the elongation at break increased to 265.7%, while retaining the original tensile strength. Dynamic rheology experiments further confirmed the generation of branched or "rubbery" core‐shell structures, and a doubling of gas barrier properties was observed with increased silica nanoparticles, suggesting potential applications in food packaging or biopharmaceuticals. Highlights Nanocomposites with core‐shell structure and improved mechanical properties. Dynamic rheology experiments confirmed the formation of the core‐shell structure. Significantly improved gas barrier properties due to core‐shell structure.

The reinforcement and toughening of jute/PLA (lactic acid) composite material with modified-rubber/SiO2 core-shell particles

Influence of Hot Press Molding Parameters on the Tensile Strength of Bamboo Fiber/PLA Composites

The Mechanical Properties of Jute/PLA Composites Combining Nano Polymerized Styrene Butadiene Rubber Modified by Coupling Agents

Characterization of mechanical properties of jute/PLA composites containing nano SiO2 modified by coupling agents

Preparation and characterization of crystalline poly(L‐lactic acid)/silica nanocomposite films with high ductility and gas barrier properties

Toughening polylactide using epoxy-functionalized core-shell starch nanoparticles

Polylacitde Nanocomposites with Better Crystallinity, Conductivity, Stiffness and Toughness Balance by Cooperation of MWCNT and Reactive Core–shell Modifier

Strikingly toughening polylactide by using novel core-shell starch-based nanoparticles with double polymer shells

Toughening and Heat-Resistant Modification of Degradable PLA/PBS-Based Composites by Using Glass Fiber/Silicon Dioxide Hybrid Fillers

Reinforcement of Polylactic Acid for Fused Deposition Modeling Process with Nano Particles Treated Bamboo Powder

Grafting Modification of the Reactive Core-Shell Particles to Enhance the Toughening Ability of Polylactide

Synergistic preparation of a straw fiber/polylactic acid composite with high toughness and strength through interfacial compatibility enhancement and elastomer toughening

Modification of Reactive PB‐g‐SAG Core–shell Particles to Achieve Higher Toughening Ability for Brittle Polylactide

Preparation of immiscible XSBR/PAM composite by constructing a leaf vein bionic nano-micro structure

Improving the toughness and flame retardancy of poly (lactic acid) with phosphorus‐containing core‐shell particles

Toward ultra-tough and heat-resistant biodegradable polylactide/core-shell rubber blends by regulating the distribution of rubber particles with stereocomplex crystallites

Simultaneous strengthening and toughening of PLA with full recyclability enabled by resin-microsphere-modified L-lactide oligomers

Simultaneously reinforcing and toughening poly(lactic acid) by incorporating reactive melt‐functionalized silica nanoparticles

Lignin-derivable block copolymer micelle for effectively reinforcing and toughening polylactic acid

Toughening of Epoxy Resin with Poly(Methyl Methacrylate) Grafted Silica Core-Shell Particles

Properties of Poly(Lactic Acid)/Poly(Butylene Adipate-Co-Terephthalate)/Nanoparticle Ternary Composites