Abstract:Plant fiber-reinforced polylactic acid (PLA) exhibits excellent mechanical properties and environmental friendliness and, therefore, has a wide range of applications. This study investigated the mechanical properties of three short plant fiber-reinforced PLA composites (flax, jute, and ramie) using mechanical testing and material characterization techniques (SEM, FTIR, and DSC). Additionally, we propose a methodology for predicting the mechanical properties of high-content short plant fiber-reinforced composite materials. Results indicate that flax fibers provide the optimal reinforcement effect due to differences in fiber composition and microstructure. Surface pretreatment of the fibers using alkali and silane coupling agents increases the fiber–matrix interface contact area, improves interface performance, and effectively enhances the mechanical properties of the composite. The mechanical properties of the composites increase with increasing fiber content, reaching the highest value at 40%, which is 38.79% higher than pure PLA. However, further increases in content lead to fiber agglomeration and decreased composite properties. When the content is relatively low (10%), the mechanical properties are degraded because of internal defects in the material, which is 40.42% lower than pure PLA. Through Micro-CT technology, the fiber was reconstructed, and it was found that the fiber was distributed mainly along the direction of injection molding, and the twin-screw process changes the shape and length of the fiber. By introducing the fiber agglomeration factor function and correcting the Halpin-Tsai criterion, the mechanical properties of composite materials with different contents were successfully predicted. Considering the complex stress state of composite materials in actual service processes, a numerical simulation method was established based on transversely isotropic material using the finite element method combined with theoretical analysis. The mechanical properties of high-content short plant fiber-reinforced composite materials were successfully predicted, and the simulation results showed strong agreement with the experimental results.

The Mechanical Properties of Jute/PLA Composites Combining Nano Polymerized Styrene Butadiene Rubber Modified by Coupling Agents

The reinforcement and toughening of jute/PLA (lactic acid) composite material with modified-rubber/SiO2 core-shell particles

Characterization of mechanical properties of jute/PLA composites containing nano SiO2 modified by coupling agents

Natural jute fiber treated with silane coupling agent KH570 reinforced polylactic acid composites: mechanical and thermal properties

Influence of structural design on mechanical and thermal properties of jute reinforced polylactic acid (PLA) laminated composites

Sustainable jute fiber reinforced polylactic acid composite: Thermochemical and thermomechanical characteristics

Improved Mechanical Properties of Jute Fiber/Polypropylene Composite with Interface Modified by Sodium Lignosulfonate

Influence of carboxy-terminated hyperbranched polyester and polyethylene glycol on the mechanical and thermal properties of polylactic acid/straw flour composites

Effect of short jute fibers on the hydrolytic degradation behavior of poly(lactic acid)

Influence of surface treatments and addition of a reactive agent on the properties of PLA/flax and PLA/bamboo composites

Tribological Properties of Hemp Fiber Reinforced Polylactic Acid Bio-Composites: Effect of Different Types of Modification Methods

Effect of Styrene-Maleic Anhydride Copolymer on Properties of PBST/PLA Blends

Effect of silane coupling agent on compatibility interface and properties of wheat straw/polylactic acid composites

Effects of Chitosan Nanoparticles and 4,4′ Methylene-Diphenyl Diisocyanate on the Polylactic Acid/Poly (Butyleneadipate-Co-Terephthalate) Composite Properties

Properties of Poly(Lactic Acid)/Poly(Butylene Adipate-Co-Terephthalate)/Nanoparticle Ternary Composites

Synergistic modification of polylactic acid by oxidized straw fibers and degradable elastomers: A green composite with good strength and toughness

Enhancing the mechanical properties of polylactic acid (PLA) composite films using Pueraria lobata root microcrystalline cellulose

Polylacitde Nanocomposites with Better Crystallinity, Conductivity, Stiffness and Toughness Balance by Cooperation of MWCNT and Reactive Core–shell Modifier

Mechanical Performances Analysis and Prediction of Short Plant Fiber-Reinforced PLA Composites

Study on performance characteristics of fused deposition modeling 3D ‐printed composites by blending and lamination

Influence of fiber volume fraction and curing temperature on mechanical properties of jute/PLA green composites