Abstract:Plant fiber-reinforced polylactic acid (PLA) exhibits excellent mechanical properties and environmental friendliness and, therefore, has a wide range of applications. This study investigated the mechanical properties of three short plant fiber-reinforced PLA composites (flax, jute, and ramie) using mechanical testing and material characterization techniques (SEM, FTIR, and DSC). Additionally, we propose a methodology for predicting the mechanical properties of high-content short plant fiber-reinforced composite materials. Results indicate that flax fibers provide the optimal reinforcement effect due to differences in fiber composition and microstructure. Surface pretreatment of the fibers using alkali and silane coupling agents increases the fiber–matrix interface contact area, improves interface performance, and effectively enhances the mechanical properties of the composite. The mechanical properties of the composites increase with increasing fiber content, reaching the highest value at 40%, which is 38.79% higher than pure PLA. However, further increases in content lead to fiber agglomeration and decreased composite properties. When the content is relatively low (10%), the mechanical properties are degraded because of internal defects in the material, which is 40.42% lower than pure PLA. Through Micro-CT technology, the fiber was reconstructed, and it was found that the fiber was distributed mainly along the direction of injection molding, and the twin-screw process changes the shape and length of the fiber. By introducing the fiber agglomeration factor function and correcting the Halpin-Tsai criterion, the mechanical properties of composite materials with different contents were successfully predicted. Considering the complex stress state of composite materials in actual service processes, a numerical simulation method was established based on transversely isotropic material using the finite element method combined with theoretical analysis. The mechanical properties of high-content short plant fiber-reinforced composite materials were successfully predicted, and the simulation results showed strong agreement with the experimental results.

Characterization of mechanical properties of jute/PLA composites containing nano SiO2 modified by coupling agents

Improvements in Compatibility and Properties of Biocomposites Modified Through Nanosilica Attachment

Improved properties of PLA biocomposites toughened with bamboo cellulose nanowhiskers through silane modification

PLA toughened by bamboo cellulose nanowhiskers: Role of silane compatibilization on the PLA bionanocomposite properties

High-toughness PLA/Bamboo Cellulose Nanowhiskers Bionanocomposite, Strengthened with Silylated Ultrafine Bamboo-Char

The Mechanical Properties of Jute/PLA Composites Combining Nano Polymerized Styrene Butadiene Rubber Modified by Coupling Agents

Preparation And Properties Of Polylactide/Poly(Ethylene-Co-Octene)/Nano-Sio2 Ternary Composites

Effect of nano-SiO2 on the compatibility interface and properties of polylactic acid-grafted-bamboo fiber/polylactic acid composite

Effect of SiO2 nano-interphase on the water absorption mechanism of natural fiber reinforced composites: A multi-scale study

Natural jute fiber treated with silane coupling agent KH570 reinforced polylactic acid composites: mechanical and thermal properties

The reinforcement and toughening of jute/PLA (lactic acid) composite material with modified-rubber/SiO2 core-shell particles

Improved Mechanical Properties of Jute Fiber/Polypropylene Composite with Interface Modified by Sodium Lignosulfonate

Investigation on physical and mechanical behavior of nano‐silica particle filled woven jute/kenaf hybrid nanocomposites

Influence of structural design on mechanical and thermal properties of jute reinforced polylactic acid (PLA) laminated composites

Improved impact strength of poly(lactic acid) by incorporating poly(butylene succinate) and silicon dioxide nanoparticles

Influence of surface treatments and addition of a reactive agent on the properties of PLA/flax and PLA/bamboo composites

Enhanced Properties of Poly(lactic Acid) with Silica Nanoparticles

Effect of Surface Modification on Impact Strength and Flexural Strength of Poly(lactic acid)/Silicon Carbide Nanocomposites

Effect of silane coupling agent on compatibility interface and properties of wheat straw/polylactic acid composites

Mechanical Performances Analysis and Prediction of Short Plant Fiber-Reinforced PLA Composites

Effect of short jute fibers on the hydrolytic degradation behavior of poly(lactic acid)