Abstract:As well known, sustainability issues represented by the environment and resource protection have been paid close attention nowadays. Natural fiber has been an increasing interest and promising as reinforcing fiber in polymeric composites due to its low density, cost, acceptable specific strength and biodegradation. Even though, the principle challenge for natural fibers used as reinforcement is their internal strong water-absorption ability when the exposed in wet and water environment. Long-term hydrothermal degradation behavior of Glass reinforced composite (GFRP) and jute reinforced composite (JFRP) have been discussed in previous study on the basis of the great amount of physical and mechanical testing results. As former working reported, gained water content increases linearly against the square root of aging time followed by gradual increase trend in longer duration both in JFRP and GFRP. In particularly, JFRP’s weight loss performance occurred earlier with higher value compared to GFRP. However, water absorption and weight loss mechanism, relationship between weight change and retention of mechanical property for JFRP didn’t report and illustrate clearly and extensively. Therefore, in order to figure it out comprehensively, the current study was focus on hydrothermal ageing mechanism and corresponding degraded mechanical behavior. Firstly, 2 layers of deeply dried and natural dried jute woven fabric reinforced unsaturated polyester were fabricated by hand-layup method. The cut samples were immersed into 80°C hot water bath for predetermined durations and inspected by ultrasonic wave. Afterwards, 3-point bending test with acoustic emission (AE) measurement was carried out for aged samples. The weight change mechanism, evolution of internal deterioration and mechanical property along with ageing time was investigated. The result indicated that JFRP can absorb water easily and quickly compared with GFRP owing to jute fiber’s hydroscopic nature. Weight loss was caused as a result of resin particle loss and pectin dissolution from the developed micro-crack owing to hydrothermal water environment. What’s more, internal serious deterioration occurred after 24 hours immersion leading to larger reduction of mechanical property.

Effect of short jute fibers on the hydrolytic degradation behavior of poly(lactic acid)

Effect Of Jute On The Hydrolytic Degradation Of Poly(Lactic Acid)

Effect of Hydrothermal Aging on Injection Molded Short Jute Fiber Reinforced Poly(Lactic Acid) (PLA) Composites

Hygrothermal Aging and Structural Damage of a Jute/poly (lactic Acid) (PLA) Composite Observed by X-ray Tomography

Effect of Saline and Alkaline Solution Aging on the Properties of Jute/poly(lactic Acid) Composites

Influence of structural design on mechanical and thermal properties of jute reinforced polylactic acid (PLA) laminated composites

Enzymatic Degradation Behaviors and Kinetics of Bio-Degradable Jute/poly (lactic Acid) (PLA) Composites

Hydrothermal Ageing Mechanism of Natural Fiber Reinforced Composite in Hot Water

Study on Natural Aging Properties of Bamboo Fibers/polylactic Acid Composites

Influence of water absorption track and pre‐drying treatment on the long‐term hydrothermal aging behavior of recycled jute fabric‐reinforced composites

Sustainable jute fiber reinforced polylactic acid composite: Thermochemical and thermomechanical characteristics

Water Absorption and Hygrothermal Aging Behavior of Short Ramie Fiber‐reinforced Poly(lactic Acid) Composites

Experimental Investigation on Fabrication and Thermal-Stamping of Woven Jute/polylactic Acid Biocomposites

Moisture effect on tensile and low‐velocity impact tests of flax fabric‐reinforced PLA biocomposite

Biodegradation of Jute/poly(lactic Acid) Composites by Fungi

Thermal aging properties of bamboo fibers reinforced polylactic acid composites

Natural jute fiber treated with silane coupling agent KH570 reinforced polylactic acid composites: mechanical and thermal properties

Effect of surface treatment of cotton fibers on the durability of polylactic acid/cotton-fiber biocomposites

Influence of fiber volume fraction and curing temperature on mechanical properties of jute/PLA green composites

The Mechanical Properties of Jute/PLA Composites Combining Nano Polymerized Styrene Butadiene Rubber Modified by Coupling Agents

Poly(lactic acid)/pulp fiber composites: The effect of fiber surface modification and hydrothermal aging on viscoelastic and strength properties