Abstract:Polymer blend nanocomposites based on polylactic acid (PLA) were prepared via simple melt blending and investigated for its biodegradation behavior. The CNTs were surface-modified using acid treatment, and characterizations of composites were done using FTIR. FTIR spectra confirmed the surface modification of CNTs. The water uptake and weight loss behavior in hydrolytic analysis of CNT and m-CNT nanocomposites at different temperatures (25 and 45 °C) were studied. It was found that the water absorption and weight loss of nanocomposites increase by incorporation of CNTs and m-CNTs up to 2% for all samples, with and without PEG loading. In sample PLA/CNTs, 2% CNTs loading shows 1.18% water uptake at 25 °C and increases to 1.95% at 45 °C water immersion, whereas, in PLA/m-CNT nanocomposites, the water uptake reduces at 1.16% at 25 °C and 1.50% at 45 °C of analysis. In the meanwhile, the weight loss of 2% CNTs loading in PLA shows 2.88% at 25 °C and 6.28% at 45 °C, and for m-CNTs loading, the weight loss exhibits 2.09% at 25 °C and 5.29% at 45 °C. This proved the modified CNTs be able to retard the ability of nanocomposites degradation. The effect of plasticizer addition in nanocomposites was studied by loading 5 and 10% PEG. As expected, the inclusion of PEG enhanced the rate of degradation in both hydrolytic and soil burial studies. For the same amount of 2% CNTs inclusions and 10% PEG, at 45 C, the water uptake shows 5.56% as compared with 5% PEG loading, only 3.1% water uptake is shown. In soil burial test, the weight loss also increases with the addition of nanofiller. PLA/m-CNTs show lower weight loss which is only 4.50% and around 7.02% for PLA/CNTs nanocomposite. In the other hand, 10% PEG loading shows an increase in the weight loss in both CNT and m-CNT nanocomposites. Results from this study demonstrate that the inclusion of CNTs and m-CNTs into polymer matrix could increase the environmental persistence of polymers in lakes, landfills and surface waters.

Hydrolytic And Thermal Degradation Of Polyethylene Glycol Compatibilized Poly(Lactic Acid)-Nanocrystalline Cellulose Bionanocomposites

Preparation and Thermomechanical Properties of Nanocrystalline Cellulose Reinforced Poly(Lactic Acid) Nanocomposites

Effect of nanocrystalline cellulose on mechanical, thermal, and barrier properties of polylactic acid blown composite film

Crystallization mechanism and performance of polylactic acid regulated by the synergistic action of nanocrystalline cellulose and polyethylene glycol

Assessing the Effect of Cellulose Nanocrystal Content on the Biodegradation Kinetics of Multiscale Polylactic Acid Composites under Controlled Thermophilic Composting Conditions

The Mechanical Properties and Degradation Behavior of 3D-Printed Cellulose Nanofiber/Polylactic Acid Composites

The effect of poly(ethylene glycol) on the properties of poly (lactic acid)/silane-modified bacterial cellulose nanocomposites

Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

Elucidating the plasticizing effect on mechanical and thermal properties of poly(lactic acid)/carbon nanotubes nanocomposites

Enzyme-catalyzed Degradation Behavior of L-Lactide/trimethylene Carbonate/glycolide Terpolymers and Their Composites with Poly(l-Lactide-co-glycolide) Fibers

Synergistic Effects of Polyethylene Glycol and Cellulose Nanofibers on the Isothermal and Non-isothermal Crystallization Behaviors of Polylactide

Effect of Multi-Walled Carbon Nanotubes on the Crystallization and Hydrolytic Degradation of Biodegradable Poly(l-Lactide)

Inhibitory effect of hydrogen bonding on thermal decomposition of the nanocrystalline cellulose/poly(propylene carbonate) nanocomposite

Effects of multi-walled carbon nanotubes (MWCNTs) on the degradation behavior of plasticized PLA nanocomposites

The Effect of Stereocomplexation and Crystallinity on the Degradation of Polylactide Nanoparticles

Thermal and mechanical properties of polyethylene glycol (PEG)-modified lignin/polylactic acid (PLA) biocomposites

Effect of Poly(propylene carbonate) on Properties of Polylactic Acid-Based Composite Films

Enhanced thermal stability, toughness, and electrical conductivity of carbon nanotube-reinforced biodegradable poly(lactic acid)/poly(ethylene oxide) blend-based nanocomposites

PLA-Based Biodegradable Copolyester Nanocomposites: Preparation, Characterization and Mechanical Properties

Degradation Behaviors of Polylactic Acid, Polyglycolic Acid, and Their Copolymer Films in Simulated Marine Environments

Structure and Properties of Polylactic Acid Biocomposite Films Reinforced with Cellulose Nanofibrils