Abstract:Nowadays, companies and researchers are concerned about the negative consequences of using synthetic polymers and direct their efforts to create new alternatives such as biocomposites. This study investigated the effect of biobased SiO2 on the properties of poly(L-lactic acid)/SiO2 (PLLA/SiO2) and poly(L-lactic acid)/SiO2/poly(ethylene glycol) (PLLA/SiO2/PEG) composites. The SiO2 was obtained from rice husk incineration and mixed with PLLA at various concentrations (5, 10, and 15 wt.%) via melt extrusion before compression molding. Furthermore, PLLA/SiO2/PEG composites with various PEG concentrations (0, 3, 5, and 10 wt.%) with 10 wt.% SiO2 were produced. The sample morphology was studied by scanning electron microscopy (SEM) to analyze the dispersion/adhesion of SiO2 in the polymer matrix and differential scanning calorimetry (DSC) was used under isothermal and non-isothermal conditions to study the thermal properties of the samples, which was complemented by thermal stability study using thermogravimetric analysis (TGA). Rheological analysis was performed to investigate the viscoelastic behavior of the composites in the melt state. At the same time, tensile mechanical properties were obtained at room temperature to determine their properties in the solid state. DSC and X-ray diffraction analysis (XRD) were combined to determine the crystalline state of the samples. Finally, gas permeation measurements were performed using a variable pressure (constant volume) method to analyze the permeability of different gases (CO2, CH4, O2, and H2). The results showed that SiO2 decreased the PLLA chain mobility, slowing the crystallization process and lowering the gas permeability while increasing Young’s modulus, thermal stability, and viscosity. However, PEG addition increased the crystallization rate compared to the neat PLLA (+40%), and its elongation at break (+26%), leading to more flexible/ductile samples. Due to improved silica dispersion and PLLA chain mobility, the material’s viscosity and gas permeability (+50%) were also improved with PEG addition. This research uses material considered as waste to improve the properties of PLA, obtaining a material with the potential to be used for packaging.

The effect of poly(ethylene glycol) on the properties of poly (lactic acid)/silane-modified bacterial cellulose nanocomposites

Toughness Enhancement of Poly(lactic Acid), Bamboo Particle and Ultrafine Bamboo-Char Ternary Biocomposites by Polyethylene Glycol Plasticization

Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

Effect Of Polyethylene Glycol On The Crystallization And Impact Properties Of Polylactide-Based Blends

Hydrolytic And Thermal Degradation Of Polyethylene Glycol Compatibilized Poly(Lactic Acid)-Nanocrystalline Cellulose Bionanocomposites

Crystallization mechanism and performance of polylactic acid regulated by the synergistic action of nanocrystalline cellulose and polyethylene glycol

Effect of Poly(Ethylene Glycol) on the Properties and Foaming Behavior of Macroporous Poly(Lactic Acid)/Sodium Chloride Scaffold

Effect of PEG on Property of Poly(lactic Acid)/ecoflex Blend

Synergistic Effects of Polyethylene Glycol and Cellulose Nanofibers on the Isothermal and Non-isothermal Crystallization Behaviors of Polylactide

The Effect of Polyethylene Glycol on the Non-Isothermal Crystallization of Poly(L-lactide) and Poly(D-lactide) Blends

Effect of nanocrystalline cellulose on mechanical, thermal, and barrier properties of polylactic acid blown composite film

Effect of PEG on Properties of Poly（lactic Acid ） /glutinous Rice Flour Blends

Thermal and mechanical properties of polyethylene glycol (PEG)-modified lignin/polylactic acid (PLA) biocomposites

Effect of Biobased SiO2 on the Morphological, Thermal, Mechanical, Rheological, and Permeability Properties of PLLA/PEG/SiO2 Biocomposites

Morphologies, crystallization, and mechanical properties of PLA-based nanocomposites: Synergistic effects of PEG/HNTs

Preparation and Thermomechanical Properties of Nanocrystalline Cellulose Reinforced Poly(Lactic Acid) Nanocomposites

Mechanical Properties and Non-Isothermal Crystallization Kinetics of Polylactic Acid Modified by Polyacrylic Elastomers and Cellulose Nanocrystals

The Effect of Poly (Ethylene glycol) Emulation on the Degradation of PLA/Starch Composites

Effect of Plasticization/Annealing on Thermal, Dynamic Mechanical, and Rheological Properties of Poly(Lactic Acid)

Influence of carboxy-terminated hyperbranched polyester and polyethylene glycol on the mechanical and thermal properties of polylactic acid/straw flour composites

Effects of preparation and properties of poly(lactic acid) /poly(1,2-propylene glycol adipate) blends