Abstract:A valid strategy to tailor the properties of polylactic acid for more extensive applications was introducing filler. In this work, basalt fiber assembled with in-situ SiO2 nanoparticles on the surface was successfully prepared via hydrothermal method and it was further treated with coupling agent KH-550 to improve interfacial interaction between polylactic acid (PLA) and basalt fibers (BF). It was demonstrated that the introduction of BFS could increase the crystallization of PLA and resulted in forming trans-crystallization based on TG and DSC results. The tensile strength of PLA/BF composites raised from 39 MPa to 62.5 MPa with increasing the fiber loading from 1 wt% to 10 wt%. Furthermore, the interfacial interaction could be effectively improved by assembling SiO2 (especially with 250 nm in diameter) on BF surface to build mechanical locking, which could keep the PLA matrix in place during the mechanical deformation with the tensile strength value raised from 62.5 MPa to 74.0 MPa. It is noticeable that the impact and flexural properties were effectively increased with the incorporation of in-situ SiO2 nanoparticles. The further KH-550 treatment made a positive impact as well. For instance, the impact strength and flexural strength of the sample with SiO2 and KH-550 modification were improved to 22.49 kJ/m(2) and 146.83 MPa and it enhanced about 42.16% and 41.04% than those of neat PLA, respectively. Therefore, an efficient enhancement of mechanical performance was achieved and this concept of assembling in-situ SiO2 on silica-based fiber as a modifier was a novel and simple path to design the interfacial construction and properties of the polymer composites. (C) 2021 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Effect of Surface Modification on Impact Strength and Flexural Strength of Poly(lactic acid)/Silicon Carbide Nanocomposites

Improvements in Compatibility and Properties of Biocomposites Modified Through Nanosilica Attachment

Enhancement of Impact Strength of Poly(lactic Acid)/silicon Carbide Nanocomposites Through Surface Modification with Titanate-Coupling Agents

Improved impact strength of poly(lactic acid) by incorporating poly(butylene succinate) and silicon dioxide nanoparticles

Fracture Toughness Improvement of Poly(lactic Acid) Reinforced with Poly(ε-caprolactone) and Surface-Modified Silicon Carbide

Enhanced Properties of Poly(lactic Acid) with Silica Nanoparticles

Reinforcing poly(lactic acid)/poly(butylene succinate) biodegradable blends with silicon carbide (SiC): A silane‐coupled approach for enhanced mechanical and thermal performance

Grafting Polymerization of Polylactic Acid on the Surface of Nano‐sio2 and Properties of PLA/PLA‐grafted‐SiO2 Nanocomposites

Effect of nano-SiO2 on the compatibility interface and properties of polylactic acid-grafted-bamboo fiber/polylactic acid composite

Microstructure and mechanical properties of SiC-Al2O3 nanocomposite prepared by surface modified SiC nanopowders

The Effect of Surface Modification of Glass Fiber on the Performance of Poly(lactic Acid) Composites: Graphene Oxide Vs. Silane Coupling Agents

Effect of Wet Surface Treated Nano-Sio2 on Mechanical Properties of Polypropylene Composite

Effect of silane coupling agent on compatibility interface and properties of wheat straw/polylactic acid composites

Enhancement of the mechanical properties of polylactic acid/basalt fiber composites via in-situ assembling silica nanospheres on the interface

Silica Nanoparticles Filled Polypropylene: Effects of Particle Surface Treatment, Matrix Ductility and Particle Species on Mechanical Performance of the Composites

Synthesis of an Efficient Processing Modifier Silica-g-poly(lactic Acid)/poly(propylene Carbonate) and Its Behavior for Poly(lactic Acid)/poly(propylene Carbonate) Blends

Morphology, mechanical properties, and thermal stability of poly(L-lactic acid)/poly(butylene succinate-<i>co</i>-adipate)/silicon dioxide composites

Mechanical and Rheological Properties of PC Composite Filled with Modified SiO_2 Nanoparticles

Surface Modification of Nano-Al2O3 with Silane Coupling Agent and Its Effect on the Compressive Strength of PI/Al2O3 Composites

Improving the Interfacial Strength of Silicone Resin Composites by Chemically Grafting Silica Nanoparticles on Carbon Fiber

Interface Modification Strategy to Construct SiC Nanowires@pyrolytic Carbon Reinforcement for Carbon Fiber Composites