Abstract:Structure–property interdependency is of vital importance in developing advanced polymer nanocomposites as well as enhancing their ultimate properties. In this research study, toughening of polylactic acid (PLA) with nanofibrillated cellulose (NFC) was studied and comparison was made between the thermal and mechanical properties of systems containing pristine and modified NFC. NFC was modified through two different methods: acetylation of hydroxyl groups and grafting of poly(ethylene glycol) (PEG) onto cellulose chains. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and differential scanning calorimetry were employed to probe into the surface characteristics, thermal properties, and crystallinity of NFC/modified NFC, respectively; moreover, SEM imaging was utilized for surface morphology of the samples. Subsequently, PLA with modified and unmodified NFC was prepared to evaluate the filler addition effect on toughness. Acetylated NFC has changed the PLA crystallinity degree and rate, which affected the modulus of PLA, as signaled by the changed NFC surface. Particularly, mechanical and toughening behaviors of the prepared nanocomposites were analyzed based on tensile measurements which showed an eightfold rise in toughening along with 18% decrease in modulus of the samples comprising 1 wt% of acetylated NFC compared to a blank PLA. However, a sevenfold increase in toughening was observed upon introduction of both modified NFC to the PLA matrix. SEM observations divulged proper dispersion of NFC-g-AC in the PLA matrix which reduced stress concentration, but enhanced toughness in comparison with NFC-g-PEG with agglomeration that caused stress concentration leading to brittle behavior. In the light of the obtained results, it can be inferred that brittle PLA can be toughened by the surface-modified NFC. This research study can illuminate the way for future works on the modifications of nano-scale fillers/additives to achieve improved mechanical and thermal properties of PLA.

Polylacitde Nanocomposites with Better Crystallinity, Conductivity, Stiffness and Toughness Balance by Cooperation of MWCNT and Reactive Core–shell Modifier

High-toughness PLA/Bamboo Cellulose Nanowhiskers Bionanocomposite, Strengthened with Silylated Ultrafine Bamboo-Char

PLA toughened by bamboo cellulose nanowhiskers: Role of silane compatibilization on the PLA bionanocomposite properties

Improved properties of PLA biocomposites toughened with bamboo cellulose nanowhiskers through silane modification

Simultaneous improvement of tensile strength and toughness of polylactic acid by incorporating a biodegradable core‐shell nanofiller with double polymer layers

Enhanced the Melt Strength, Toughness and Stiffness Balance of the Reactive PB-g-SAG Core–shell Particles Modified Polylactide Blends with the Aid of a Multifunctional Epoxy-Based Chain Extender

Improved performance of poly(lactic acid) nanocomposites with poly(butyl acrylate)‐modified cellulose nanowhiskers

Strong Synergistic Toughening and Compatibilization Enhancement of Carbon Nanotubes and Multi-Functional Epoxy Compatibilizer in High Toughened Polylactic Acid (pla)/poly (butylene Adipate-Co-terephthalate) (PBAT) Blends

Synergistic Effects of Multi-Wall Carbon Nanotubes and Polycaprolactone on the Thermal and Mechanical Properties of Polylactic Acid

High performance poly(lactic acid)/poly(ether-block-amide) blend-based bionanocomposites containing carbon nanotubes and/or organoclay

Enhancement of mechanical and flame‐retardant properties of PLA composites through the combined action of flexible chain segments and hydrogen bonding interactions

Polylactic acid nanocomposites toughened with nanofibrillated cellulose: microstructure, thermal, and mechanical properties

Enhanced Mechanical, Thermal and Electrical Properties of Additively Manufactured Polylactic Acid/Carbon Nanotube Polymer Nanocomposites

Modified cellulose nanocrystals based on SI‐ATRP for enhancing interfacial compatibility and mechanical performance of biodegradable PLA / PBAT blend

A novel PLA/P(3HB-co-4HB)/MWCNT composite featuring enhanced mechanical properties and excellent thermal stability based on elongational rheology

Toughening of Polylactide with High Tensile Strength via Constructing an Integrative Physical Crosslinking Network Based on Ionic Interactions

Properties of Poly(Lactic Acid)/Poly(Butylene Adipate-Co-Terephthalate)/Nanoparticle Ternary Composites

Improving tensile strength and impact toughness of plasticized poly(lactic acid) biocomposites by incorporating nanofibrillated cellulose

Toughening polylactide using epoxy-functionalized core-shell starch nanoparticles

A facile method for carbon nanotube/carbon fiber‐reinforced polylactic acid composites

Phase Morphology and Performance of Supertough PLA/EMA–GMA/ZrP Nanocomposites Prepared through Reactive Melt-Blending