Abstract:Shape memory properties of Poly (L-lactide)/Poly (-caprolactone) (PLLA/PCL) blends reinforced with Multiwalled Carbon Nanotubes (MWCNTs) was investigated. PLLA biodegradable shape memory implants have advantages in repair and regeneration of healing tissues. One of the drawbacks of PLLAs for biomedical applications is their brittleness. One of the most practical strategies for tuning the properties of PLLA is blending with PCL. In this research, we have studied the shape memory and mechanical behavior of MWCNT/PLLA/PCL blends nanocomposites. To avoid aggregation and bundling, MWCNTs were washed with ethanol. The samples with various contents of each component were prepared by solution casting. The microstructure, mechanical properties and shape memory effect of the blends and composites were investigated by means of differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM), polarizing optical microscopy (POM) and tensile testing. The relationship between the microstructure and shape memory properties was illuminated. Differential scanning calorimetry (DSC) of MWCNTs/PLA/PCL blends shows two glass transition temperatures (Tg) and two melting points (Tm) at positions close to the pure components revealing phase separation. The Tg and Tm of composites were increased with increasing the MWCNTs content in composites.. The XRD analysis of prepared composites shows there is a significant increase in PCL crystallization in composites by MWCNTs. The tensile tests results shows that the mechanical strength and shape recovery rate were significantly increased with increasing the MWCNTs contents in composites. The crystallinity of blend was increased with increasing the PCL in composition and in composites also the crystallinity was increased with increasing the amount of MWCNTs. The mechanical behaviour of blends and composites shows large strain after yielding and high elastic strain characteristics and exhibition good shape memory effect in which the PLLA crystal and the PCL amorphous serve as fixed phase and reversible phase, respectively. The shape recovery ratio of blend at first was decreased (15%) with increasing the amount of PCL up to 20wt%, then increased (10%) with increasing the amount of PCL until 40wt%. the shape recovery ratio of composites was increased (15%) with increasing the amount of MWCNTs up to 3wt%.

Synergistic Effects of Multi-Wall Carbon Nanotubes and Polycaprolactone on the Thermal and Mechanical Properties of Polylactic Acid

Simultaneously Strengthening and Toughening Poly(lactic Acid) by Co-Additions of Poly(ɛ-caprolactone), Tributyl Citrate Plasticizer and Functionalized Multiwall Carbon Nanotube

Carbon nanotubes-filled polylactic acid/polycaprolactone biodegradable blends: Effect of the polycaprolactone viscosity and carbon nanotubes addition on the microstructure, electrical and mechanical properties

Effect of Carbon Nanotubes on Shape memory properties of poly (L-lactide)/poly (- caprolactone) blends

Crystallization Behavior and Mechanical Properties of Poly(lactic Acid) Complex Fiber Toughened by Carbon Nanotube Nanocapsules

Preparation and characterization of biodegradable polycaprolactone/multiwalled carbon nanotubes nanocomposites

Selective Localization of Multiwalled Carbon Nanotubes in Poly(ε-caprolactone)/Polylactide Blend

Synergistic Effects of Nucleating Agents and Plasticizers on the Crystallization Behavior of Poly(lactic Acid)

Selective Localization Of Multiwalled Carbon Nanotubes In Poly(Epsilon-Caprolactone)/Polylactide Blend

Simultaneous improvement of tensile strength and toughness of polylactic acid by incorporating a biodegradable core‐shell nanofiller with double polymer layers

Elucidating the plasticizing effect on mechanical and thermal properties of poly(lactic acid)/carbon nanotubes nanocomposites

Preparation and characterization of polylactic acid (PLA) carbon nanotube nanocomposites

Thermo-mechanical Properties of MWCNT-g-poly (L-Lactide)/poly (L-Lactide) Nanocomposites

Shape Memory Properties of Poly(L-Lactide) / Poly(ε-Caprolactone) Blends and Their Composites with Carbon Nanotubes

Effect of functionalized multiwalled carbon nanotubes on thermal stability of poly (L-LACTIDE) biodegradable polymer

Crystallinity of Biodegradable Polymers Reinforced with Functionalized Carbon Nanotubes

Thermo-mechanical properties of MWCNT- g -poly ( l -lactide)/poly ( l -lactide) nanocomposites

Multi-interfaces Investigation on the PLA Composites Toughened by Modified MWCNTs

The Effect of Carbon Nanotubes-Grafted Lactide on the Mechanical and Thermal Properties of Poly (lactic Acid) Biocomposites

Nonisothermal Crystallization Kinetics and Thermomechanical Properties of Multiwalled Carbon Nanotube‐reinforced Poly(ε‐caprolactone) Composites

In Vitro Degradation of Poly( L -Lactide)/poly(ε-caprolactone) Blend Reinforced with MWCNTs