Abstract:For polylactide (PLA) toughening modification by rubbery materials, the toughness generally improved at the expense of lowered mechanical strength even after interfacial compatibilization. In this work, an "integration toughening mechanism" was developed for preparing PLA-based materials with simultaneous high strength and high toughness by constructing an integrative physical network throughout both the toughening phase and PLA matrix. A multiblock copolymer containing polycaprolactone (PCL) blocks, PLA blocks, and ionic segments with a random block sequence was prepared and then incorporated with PLA for constructing a physical network based on ionic interactions among copolymers. When subjected to dynamic impact stress, the yield and plastic deformation take place in both the PCL toughening phase and the amorphous region of PLA to dissipate impact energy owing to the integrative network, resulting in a high impact toughness of the material (46.5 kJ/m<sup>2</sup>). Meanwhile, when subjected to static tensile stress, the integrative network effectively inhibited the large-scale deformation of the PCL phase and promoted the whole system including those rigid crystalline regions to resist external stress. Therefore, the toughening-modified PLA exhibited a relatively high tensile strength (72 MPa) comparable to that of neat PLA.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.macromol.0c02181?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.macromol.0c02181</a>.Composition of copolymers; diameter distribution of the toughening phase in toughened PLA; and the crystallinity of PLA and toughened PLA (<a class="ext-link" href="/doi/suppl/10.1021/acs.macromol.0c02181/suppl_file/ma0c02181_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Strikingly toughening polylactide by using novel core-shell starch-based nanoparticles with double polymer shells

Toughening polylactide using epoxy-functionalized core-shell starch nanoparticles

Design of degradable core-shell starch nanoparticles by radical ring-opening polymerization of 2-methylene-1,3-dioxepane and their toughening of poly (lactic acid)

Improving the toughness and flame retardancy of poly (lactic acid) with phosphorus‐containing core‐shell particles

The compatibilization of poly (propylene carbonate)/poly (lactic acid) blends in presence of core-shell starch nanoparticles

Simultaneous improvement of tensile strength and toughness of polylactic acid by incorporating a biodegradable core‐shell nanofiller with double polymer layers

Grafting Modification of the Reactive Core-Shell Particles to Enhance the Toughening Ability of Polylactide

Modification of Reactive PB‐g‐SAG Core–shell Particles to Achieve Higher Toughening Ability for Brittle Polylactide

Lignin-derivable block copolymer micelle for effectively reinforcing and toughening polylactic acid

Supertoughened Polylactide Via the Addition of Low Content Poly(ε-caprolactone) and Tensile Deformation above the Glass Transition Temperature

Toughening of Polylactide with High Tensile Strength via Constructing an Integrative Physical Crosslinking Network Based on Ionic Interactions

Effectively toughening polypropylene with in situ formation of core-shell starch-based particles

Effect of Core-shell Ratio of the Modifier on the Properties of Toughened Polylactide Acid

Toughening Modification of Polylactic Acid by Long-Chain Hyperbranched Polymers Containing Polycaprolactone end Groups

Synergistic preparation of a straw fiber/polylactic acid composite with high toughness and strength through interfacial compatibility enhancement and elastomer toughening

Design of biodegradable PLA/PBAT blends with balanced toughness and strength via interfacial compatibilization and dynamic vulcanization

Enhanced the Melt Strength, Toughness and Stiffness Balance of the Reactive PB-g-SAG Core–shell Particles Modified Polylactide Blends with the Aid of a Multifunctional Epoxy-Based Chain Extender

Highly Toughened and Heat-Resistant Poly(lactic acid) with Balanced Strength Using an Unsaturated Liquid Crystalline Polyester via Dynamic Vulcanization

Bio-based Polyamide-Assisted Supertoughening of Polylactide Through Hardening of the EGMA Elastomeric Domains of Much Low Amount

Synthesis and investigation of sustainable long-chain branched poly(lactic acid-r-malic acid) copolymer as toughening agent for PLA blends

Toughening Modification of Poly(lactic acid) via Melt Blending