Abstract:Additive manufacturing of bamboo‐inspired continuous fiber reinforced multi‐matrix composites and the effects of parameters (nozzle temperature, printing speed, extrusion width and layer height) on mechanical properties. Inspired by the exceptional strength and toughness of fresh bamboo, a low‐cost method for preparing continuous fiber‐reinforced multi‐matrix composites based on 3D printing was proposed in this paper. Through the design of a special extrusion nozzle, the controllable feed of polylactic‐acid (PLA) and thermoplastic polyurethane (TPU) filaments was achieved, allowing for the preparation of continuous carbon fiber reinforced PLA/TPU composites. The effects of various process parameters on the tensile and flexural properties of the CCFR‐PLA/TPU composites were investigated. Additionally, the relationship between process parameters and the formation of the matrix‐fiber interface and PLA‐TPU interface was analyzed. The results show that layer height has the greatest influence on mechanical properties, while the printing speed has the least influence. The mechanical properties of the CCFR‐PLA/TPU composites and the unreinforced blend matrix, prepared using the optimal combination of process parameters, were tested. The results demonstrated that the tensile strength and flexural strength of the CCFR‐PLA/TPU composites increased by 16.95 and 1.80 times, respectively, compared to the unreinforced blend matrix. Further, inspired by the overall structure of bamboo, a stiffness gradient CCFR composite material was designed and prepared. The methodology employed in this study holds significant implications for the advancement of novel multi‐matrix hybrid continuous fiber reinforced composites, particularly in aerospace and related industries. Highlights Multi‐matrix continuous fiber reinforced composites were prepared by 3D printing inspired by fresh bamboo. The effects of process parameters (nozzle temperature, printing speed, extrusion width, layer height) on mechanical properties were investigated. The optimal printing parameter combination was determined by range analysis. Stiffness gradient composites were prepared inspired by the overall structure of bamboo.

Influence of Hot Press Molding Parameters on the Tensile Strength of Bamboo Fiber/PLA Composites

Impact Response of Bamboo-Plastic Composites with the Properties of Bamboo and Polyvinylchloride (PVC)

Nonisothermal Crystallization Behavior of Biocomposites from Poly(lactic Acid) and Bamboo Fiber

Poly(Lactic Acid) Biocomposites Reinforced With Ultrafine Bamboo-Char: Morphology, Mechanical, Thermal, And Water Absorption Properties

Preparation and Characterization of Maleic Anhydride Compatibilized Poly(lactic acid)/Bamboo Particles Biocomposites

Effect of Low‐concentration Alkali Solution Pretreatment on the Properties of Bamboo Particles Reinforced Poly(lactic Acid) Composites

Effect of Hydrothermal Pretreatment on the Properties of Moso Bamboo Particles Reinforced Polyvinyl Chloride Composites

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

Development of polylactic acid‐untreated bamboo filler composite and its chemical and mechanical properties

Effect of processing temperature and polymer types on mechanical properties of bamboo fiber composites

PREPARATION PROCESS AND INTERFACE MODIFICATION ON THE MECHANICAL PROPERTIES OF BAMBOO FIBER/ POLYPROPYLENE CARBONATE COMPOSITES

Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing

Poly(l-lactide)/poly(d-lactide)/bamboo fiber (BF) bio-composites with enhanced heat resistance, mechanical and rheological performance

Effects of process parameters on mechanical properties and interface of 3D printed bamboo‐inspired CCFR‐PLA/TPU composites

Influence of hot-pressing temperature and density on the physical and mechanical properties of bamboo scrimber

Effect of Process Parameters on Tensile Mechanical Properties of 3D Printing Continuous Carbon Fiber-Reinforced PLA Composites

Study of the manufacturing process effects of fused filament fabrication and injection molding on tensile properties of composite PLA-wood parts

Reinforcing the mechanical properties of bamboo fiber/low density polyethylene composites with modified bamboo-woven structure

Influence of structural design on mechanical and thermal properties of jute reinforced polylactic acid (PLA) laminated composites

Effect of temperature on compressive mechanical properties and strength design index of reconstituted bamboo

Fiber treatment impact on toughness and interfacial bonding in epoxidized soya bean oil compatibilized PLA/PBAT bamboo fiber composites