Abstract:Ytterbium (Yb) doped optical fibers are widely used in high-power applications and ultrafast lasing since they show adequate power-handling capability and provide desirable beam quality. Yb-doped fibers with large core area can support high power but often act as a multimode fiber and compromise the output beam quality. Hence, it is important to attain a proper balance between the power-handling capability and the beam quality. Yb-doped fibers as a gain medium in pulsed fiber laser systems are prone to nonlinear optical effects due to the presence of high peak power in the ultrashort pulses. Nonlinearity such as self phase modulation (SPM) affects the width and the shape of the pulse, both temporally and spectrally, by inducing chirp during its propagation along the fiber. In this work, finite element method was employed to compute linearly polarized transverse modes and the corresponding modal powers of Yb-fibers with different core areas to optimize the trade-off between the power-handling capability and the beam quality. The optimal fiber was implemented as a gain medium in a passively mode-locked fiber laser system to generate an ultrashort picosecond pulse. The spectral width of the picosecond pulse was studied as a function of pump power to spot the presence of SPM and chirp. To grow a better understanding on the chirped pulse propagation in the fiber, nonlinear Schrödinger equation was numerically simulated in the anomalous dispersion regime under the influence of initial chirp. The simulations reveal a strategy to compress a pulse temporally and utilize it in all-fiber chirped pulse amplification to mitigate nonlinearity in high power applications.

High-Energy Femtosecond Pulses From an Ytterbium-Doped Fiber Laser With a New Cavity Design

High-energy femtosecond Yb-doped dispersion compensation free fiber laser

High-energy femtosecond Yb-doped fiber laser operating in the anomalous dispersion regime

Development of a Femtosecond High-Power Ytterbium-doped Fiber Laser System and Study on Spiky Spectral Modulation in Highly Nonlinear Chirped-Pulse Fiber Amplifiers

High-Energy Laser Pulse with A Submegahertz Repetition Rate from A Passively Mode-Locked Fiber Laser

112-Μj 180-Fs Pulses at 1-Khz Repetition Rate from Yb-Doped Laser Based on Strictly All-Fiber CPA Structure

Higher-order Mode Fiber Enables High Energy Chirped-Pulse Amplification.

Low-repetition-rate, high-energy, twin-pulse, passively mode locked Yb3+-doped fiber laser

Efficient single-cycle pulse compression of an ytterbium fiber laser at 10 MHz repetition rate

Monolithic tapered Yb-doped fiber chirped pulse amplifier delivering 126 μJ and 207 MW femtosecond laser with near diffraction-limited beam quality

Pulse Energy Scaling by Optimizing Cavity Management in Low Repetition Rate Erbium-Doped Fiber Femtosecond Lasers

97-Watt, 1.08-Gigahertz Repetition Rate, Femtosecond Yb:fiber Laser Source

Chair-like pulses in an all-normal dispersion Ytterbium-doped mode-locked fiber laser

108 fs high-power mode locked double-clad ytterbium-doped fiber laser using FePS3 saturable absorber

High-energy 100-ns single-frequency all-fiber laser at 1064 nm

High-power femtosecond pulses fiber laser system

Strictly all-fiber picosecond ytterbium fiber laser utilizing chirped-fiber-Bragg-gratings for dispersion control

Femtosecond Yb-doped Tapered Fiber Pulse Amplifiers with Peak Power of over Hundred Megawatts

Ytterbium-doped fibers for high-power fiber lasers

High Energy and High Power Pulsed Chirally-Coupled Core Fiber Laser System

Pre-chirping management of a self-similar Yb-fiber amplifier towards 80 W average power with sub-40 fs pulse generation.