Abstract:Ytterbium (Yb) doped optical fibers are widely used in high-power applications and ultrafast lasing since they show adequate power-handling capability and provide desirable beam quality. Yb-doped fibers with large core area can support high power but often act as a multimode fiber and compromise the output beam quality. Hence, it is important to attain a proper balance between the power-handling capability and the beam quality. Yb-doped fibers as a gain medium in pulsed fiber laser systems are prone to nonlinear optical effects due to the presence of high peak power in the ultrashort pulses. Nonlinearity such as self phase modulation (SPM) affects the width and the shape of the pulse, both temporally and spectrally, by inducing chirp during its propagation along the fiber. In this work, finite element method was employed to compute linearly polarized transverse modes and the corresponding modal powers of Yb-fibers with different core areas to optimize the trade-off between the power-handling capability and the beam quality. The optimal fiber was implemented as a gain medium in a passively mode-locked fiber laser system to generate an ultrashort picosecond pulse. The spectral width of the picosecond pulse was studied as a function of pump power to spot the presence of SPM and chirp. To grow a better understanding on the chirped pulse propagation in the fiber, nonlinear Schrödinger equation was numerically simulated in the anomalous dispersion regime under the influence of initial chirp. The simulations reveal a strategy to compress a pulse temporally and utilize it in all-fiber chirped pulse amplification to mitigate nonlinearity in high power applications.

Development of a Femtosecond High-Power Ytterbium-doped Fiber Laser System and Study on Spiky Spectral Modulation in Highly Nonlinear Chirped-Pulse Fiber Amplifiers

Vector-dispersion Compensation and Pulse Pedestal Cancellation in a Femtosecond Nonlinear Amplification Fiber Laser System.

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

High-Energy Femtosecond Pulses From an Ytterbium-Doped Fiber Laser With a New Cavity Design

Hundreds of picosecond pulses amplifier based on Yb-doped tapered fiber for the generation of 100 W average output power

Research on ytterbium-doped photonic crystal fiber amplifier for the femtosecond fiber laser

Ytterbium-doped fibers for high-power fiber lasers

Hundred Nano-Joules Polarization-Maintaining Yb-Doped Fiber Femtosecond Laser Amplification System

High Peak Power Picosecond Hybrid Fiber and Solid-State Amplifier System

112-Μj 180-Fs Pulses at 1-Khz Repetition Rate from Yb-Doped Laser Based on Strictly All-Fiber CPA Structure

Yb-Doped Fiber Chirped Pulse Amplification System Delivering 1 mJ, 231 fs at 1 kHz Repetition Rate

All-fiber High Energy and Peak Power Broadband Yb-doped Fiber Amplifier

Picosecond Yb-doped tapered fiber laser system with 1.26 MW peak power and 200 W average output power

High pulse energy, narrow-linewidth all-fiber 1064 nm picosecond master oscillator power amplifier system

10-µJ-level femtosecond pulse generation in the erbium CPA fiber source with microstructured hollow-core fiber assisted delivery and nonlinear frequency conversion

Generation of 8-fs and 13-nJ pulse from a Yb-fiber system with nonlinear-pulse-compression

Compact hundred-watt level picosecond laser system based on tapered double cladding fiber-single crystal fiber hybrid amplifier

High-Power GHz Burst-Mode All-Fiber Laser System with Sub 300 fs Pulse Duration

Microjoule Level Femtosecond Optical Pulses with Double-Cladding Fiber-Based Nonlinear Chirped-Pulse Amplification

Old Wavelength, New Performance: Hectowatt 200-μJ-level Femtosecond fiber CPA System at 1064 Nm

Low repetition rate broadband high energy and peak power nanosecond pulsed Yb-doped fiber amplifier