Abstract:In the present work, the feasibility and effectiveness of fabricating La2O3-doped W-based bulk using W-based composite powders of core-shell structure with W particle as a core and La(OH)3 as a shell, without hydrogen reduction treatment, was evaluated. La(OH)3 was first coated on the surface of pure W (uncoated) powders at a weight percentage of 3.50% to prepare composite (coated) powders using the electroless plating method. The uncoated and coated powders without being treated by hydrogen reduction were then sintered using spark plasma sintering (SPS) to fabricate bulks. The results showed that the core-shell structure with W particle as a core and La(OH)3 film as a shell was fabricated. La2O3-doped W-based bulk with about 2.93 wt.% La2O3 was obtained because of the transformation from La(OH)3 to La2O3. The La2O3 particles with larger sizes were distributed mainly at W grain boundaries and those with smaller sizes were distributed mainly inside W grains. The major densification mechanism of the sintered bulk from coated powders was the filling effect of La2O3 particles on the pores as compared with the sintered bulk from uncoated powders, which could be evaluated by using a two-ball sintering neck model. The relative content of O in the form of WO3 in the sintered bulk from coated powders was identical to that in the sintered bulk from uncoated powders. The W grain size of the sintered bulk from coated powders was smaller than that of the sintered bulk from uncoated powders. The thermal properties, mechanical properties, and irradiation properties of the sintered bulk from coated powders were all higher than those of the sintered bulk from uncoated powders. With the increase of sintering temperature, the evolution of the coated powders in the initial sintering period could be divided into six stages that were not completely independent and occurred in approximate sequence from the perspective of simplification. It was feasible and effective to fabricate La2O3-doped W-based bulk using the precursor W-based composite powders of core-shell structure with W particle as a core and La(OH)3 as a shell without being treated by hydrogen reduction.

Selective laser melting of lanthanum oxide-reinforced tungsten composites: microstructure and mechanical properties

Study on forming process and performance of nano-La 2 O 3 reinforced tungsten-based composites by selective laser melting

Effect of addition of micron-sized lanthanum oxide particles on morphologies, microstructures and properties of the wire laser additively manufactured Ti-6Al-4V alloy

Microstructure and Properties of La2O3 Doped W Composites Prepared by a Wet Chemical Process

Microstructures and Properties of W-Lu2O3 Composites Strengthened with Nb and C Trace Elements

Additive manufacturing of high-strength commercially pure titanium through lanthanum oxide addition

Microstructure and Properties of La2O3-doped Tungsten-Based Bulk Material and Its Densification Mechanism During Spark Plasma Sintering Process

Microstructure evolution and mechanical properties of Al-Al2O3 composites fabricated by selective laser melting

Selective Laser Melting of High-Performance Pure Tungsten: Parameter Design, Densification Behavior and Mechanical Properties

Novel WC-reinforced iron-based composites with excellent mechanical properties synthesized by laser additive manufacturing: Underlying role of reinforcement weight fraction

Effect of La2O3 content on the densification, microstructure and mechanical property of W-La2O3 alloy via pressureless sintering

Influence of La2O3 Addition on Hardness, Flexural Strength and Microstructure of Hot-Pressing Sintered WC–MgO Bulk Composites

Effects of doping route on microstructure and mechanical properties of W−1.0wt.%La2O3 alloys

Effect of Lanthanum Oxide on the Microstructure and Properties of Ti-6Al-4V Alloy during CMT-Additive Manufacturing

Microstructure and mechanical behavior of porous tungsten skeletons synthesized by selected laser melting

Microstructure and mechanical properties of WC reinforced 18Ni300 composites produced by selective laser melting

Influence of Nano-Sized La2O3 Addition on the Sintering Behavior and Mechanical Properties of WC–La2O3 Composites

Alloying Effects on the Microstructure and Properties of Laser Additively Manufactured Tungsten Materials

Microstructure and mechanical characterizations of liquid phase sintered W-Ni-Cu heavy alloy modified with La 2 O 3 and Fe addition

Microstructure evolution and mechanical properties of selective laser melting fabricated hybrid particle reinforced AlSi10Mg composites

Densification, Microstructure And Properties Of 90w-7ni-3fe Fabricated By Selective Laser Melting