Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Microstructure and performance of rare earth element-strengthened plasma-facing tungsten material

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Effect of Doped Lu2o3 on the Microstructures and Properties of Tungsten Alloy Prepared by Spark Plasma Sintering

Surface Modification and Deuterium Retention of High Energy Rate Forging W-Y2O3 Exposed to Deuterium Plasma

Damage Behavior of REE-doped W-based Material Exposed to High-Flux Transient Heat Loads

Blistering Behavior and Deuterium Retention in Tungsten Vanadium Alloys Exposed to Deuterium Plasma in the Linear Plasma Device STEP

Microstructure and deuterium retention after ion irradiation of W–Lu2O3 composites

Theoretical Predictions of the Structural and Mechanical Properties of Tungsten–Rare Earth Element Alloys

Recent Studies of Tungsten-Based Plasma-Facing Materials in the Linear Plasma Device STEP

Microstructural Effects of Y2O3 and TiC Additions in Tungsten

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Development of Tungsten As Plasma-Facing Materials by Doping Tantalum Carbide Nanoparticles

Microstructure Evolution and Effect on Deuterium Retention in Oxide Dispersion Strengthened Tungsten During He+ Irradiation

Microstructures and Properties of W-Lu2O3 Composites Strengthened with Nb and C Trace Elements

Dependence of deuterium retention and surface blistering on deuterium plasma exposure temperature and fluence in lanthanum oxide doped tungsten

Effect of rare earth oxide doping on microstructure and mechanical property of Mo-30 W solid solution alloy

D2 retention and microstructural evolution during He irradiation in candidate plasma facing material W-La2O3 alloy

Rare earth effect on microstructure, mechanical and tribological properties of CoCrW coatings

Chemical Synthesis and Oxide Dispersion Properties of Strengthened Tungsten Via Spark Plasma Sintering

Effects of doping route on microstructure and mechanical properties of W−1.0wt.%La2O3 alloys

Selective laser melting of lanthanum oxide-reinforced tungsten composites: microstructure and mechanical properties