Abstract:Binary Mg-1wt.% Gd and Mg-1wt.% Ce wrought alloys, with basal type starting texture, are subjected to plane strain compression. Specially oriented specimens invoking c-axis extension (In Plane Compression) and c-axis compression (through thickness compression) were deformed to 6% and 13% respectively. Deformation in Mg-1Gd under in plane compression (IPC) led to evolution of sharp ‘prismatic fiber’ texture, whereas a weak basal texture was witnessed for Mg-1Ce. In case of through thickness compression (TTC), Mg-1Gd gave rise to a split basal component, whereas Mg-1Ce resulted in a weak basal component with large off-basal spread. Microstructurally, Mg-1Gd displayed unequivocal activation of both {101¯2} tension twinning and {101¯1} compression twinning during IPC, while profuse {101¯1} compression twinning for the TTC mode. Majority of the compression twins underwent second generation {101¯2} tension twinning to give rise to {101¯1}–{101¯2} double twins. Compression and double twinned regions showed strong slip activity leading to the formation of fine recovered sub-structure. On the contrary, Mg-1Ce exhibited a conventional deformation response with twinning being predominantly of {101¯2} tension type. Annealing led to preservation of the deformation texture components along with strong texture weakening. Recrystallization in Mg-1Gd commenced discontinuously in compression and double twins, which at higher temperatures showed favorable growth behavior consuming the still deformed matrix and tension twins. Mg-1Ce displayed continuous recrystallization marked by recovery and growth of orientationally soft tension twins along with nucleation in the vicinity of particles.

In situ observation of collective grain-scale mechanics in Mg and Mg–rare earth alloys

Quasi-in-situ observations of microstructural evolution during cyclic deformation of a Mg-Zn-Ca alloy

Three-dimensional study of grain scale tensile twinning activity in Mg: A combination of microstructure characterization and mechanical modeling

Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500?C using in-situ EBSD tensile test

Three-dimensional study of grain scale tensile twinning activity in magnesium: A combination of microstructure characterization and mechanical modeling

Investigation of Grain Subdivision at Very Low Plastic Strains in A Magnesium Alloy

In-situ Study of Microstructural Evolution and Local Strain Distribution During Tensile Loading of Near-Micrometre Grain Size Aluminium

Characterizing microscale deformation mechanisms and macroscopic tensile properties of a high strength magnesium rare-earth alloy: A combined experimental and crystal plasticity approach

In Situ Pure Shear Tests on Textured Magnesium AZ31B Sheets

Microstructure and Texture Evolution of Mg-3Zn-1Al Magnesium Alloy During Large-Strain Electroplastic Rolling

An SEM/EBSD study of shear bands formation in Al-0.23%wt.Zr alloy deformed in plane strain compression

In Situ Monitoring of Dislocation, Twinning, and Detwinning Modes in an Extruded Magnesium Alloy under Cyclic Loading Conditions

The Nano- And Mesoscopic Cooperative Collective Mechanisms Of Inhomogenous Elastic-Plastic Transitions In Polycrystalline Tini Shape Memory Alloys

Microstructure and texture evolution in AZX311 Mg alloy during in-plane shear deformation

Multiscale Mechanical Behavior and Microstructure Evolution of Extruded Magnesium Alloy Sheets: Experimental and Crystal Plasticity Analysis

In-situ EBSD Study of the Active Slip Systems and Lattice Rotation Behavior of Surface Grains in Aluminum Alloy During Tensile Deformation

Twin recrystallization mechanisms in magnesium-rare earth alloys

EBSD Analysis and Theoretical Prediction of Twin Orientations During Compression in Mg-3Al-1Zn

Enhanced rollability of Mg alloys by directly activated { 10 1 ̄ 2 } twinning during asymmetric rolling: Experiments and finite element analysis

Critical Shape for the Growth of Grain Boundary Twin Embryos in Mg and Mg Alloys: Crystal Plasticity Modeling

In-situ and ex-situ investigation of deformation behaviors of a dual-phase Mg−Ni−Y alloy