Abstract:In biodegradable stents made from dilute Mg-Zn-Ca alloys a small number of grains constitute the thickness of a sample limiting the mechanical constrain typically seen in polycrystalline alloys. At the same time such stents are exposed to complex loading conditions, which could potentially lead to premature failure particularly in the presence of limited slip mode activation. In order to improve our understanding of the prevailing micromechanics for such conditions hot-rolled, thin strip samples were produced with thickness to grain size ratios (t/D) of 100 and 17. Samples were extracted from such thin strips and subjected to interrupted cyclic four-point bending in order to study the in-grain misorientation axis (IGMA) evolution of selected grains during cyclic loading using quasi-in-situ electron back-scattered diffraction (EBSD). Grains were selected at the tensile and compressive faces of samples, and in the vicinity of the neutral band. Analysis of the evolution of IGMA and misorientation profiles during the bending showed that extension twinning was the dominant deformation mode in the compressive region for both t/D ratios. In addition, non-basal -type slip systems were active as a result of work hardening. In the tensile region, the activity of -type non-basal slip systems was observed for the t/D of 100, but basal/double basal slip was the dominant deformation mode for the t/D of 17. No signs of failure were observed for the sample with a t/D of 17 at the tensile region, implying that these basal slip modes can accommodate deformation largely without the assistance of other deformation modes. The neutral band evolution was mapped using grain orientation spread (GOS) analysis. In contrast to the continuum mechanics solution, a neutral band was observed instead of an axis. The position of the neutral band was dependant on the local orientation organization of the grains and the extent of work-hardening.

Quasi-in-situ observations of microstructural evolution during cyclic deformation of a Mg-Zn-Ca alloy

Electron Backscatter Diffraction Observations of Twinning–detwinning Evolution in a Magnesium Alloy Subjected to Large Strain Amplitude Cyclic Loading

Quasi-in-situ EBSD Study of the Microstructure and Texture Evolution During Static Recrystallization in an Extruded Mg-Mn-Ce Alloy

Constitutive Modeling of Slip, Twinning and Detwinning for Mg Alloy and Inhomogeneous Evolution of Microstructure

In Situ Electron Backscatter Diff Raction Analysis for Microstructure Evolution and Deformation Models of Mg–Ce Alloy During Uniaxial Loading

Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500?C using in-situ EBSD tensile test

In Situ Monitoring of Dislocation, Twinning, and Detwinning Modes in an Extruded Magnesium Alloy under Cyclic Loading Conditions

Size effects and the deformation behaviour of a dilute Mg-Zn-Ca alloy subjected to cyclic four-point bending

Microstructure Evolution and Mechanical Properties of Quasicrystal-Reinforced Mg–Zn–Gd Alloy Processed by Cyclic Extrusion and Compression

In situ observation of collective grain-scale mechanics in Mg and Mg–rare earth alloys

Dominant Deformation Mechanisms in Mg–Zn–Ca Alloy

In Situ Characterization of Deformation Twinning in Magnesium During Cyclic Loading Via Electron Backscatter Diffraction

In-situ EBSD analysis of microstructural evolution and damage behavior of Mg-Al-Ca-Mn alloys with different extrusion ratios

In-Situ Study on the Tensile Deformation and Fracture Mechanism of a Bimodal-Structured Mg-Gd-Y Alloy

Deformation Mechanisms of As-Extruded Mg–3Bi–1Ca (wt.%) Alloy During Room-Temperature Tension

Twinning–Detwinning-Dominated Cyclic Deformation Behavior of a High-Strength Mg-Al-Sn-Zn Alloy during Loading Reversals: Experiment and Modeling

Microstructure Evolution in Magnesium Alloy AZ31 During Cyclic Extrusion Compression

Evolution of Deformation Substructure and MgxZnyCaz Metastable Phase in Fine-Grained Mg Alloys

In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

Microstructure evolution during high cycle fatigue in Mg-6Zn-1Mn alloy

An Electron Back-Scattered Diffraction Study on the Microstructure Evolution of AZ31 Mg Alloy During Equal Channel Angular Extrusion