Abstract:With the development of manufacturing industry, metal tubes and rods are used more and more widely in automobile, aviation, and aerospace fields. Rotary swaging, a competitive plastic-forming technology for manufacturing tubes and rods, can realize net-shape forming for high-quality workpiece. However, in order to control the forming precision of tube or bar workpiece, the complex mechanical system was needed in the conventional swaging machine. In this paper, a rotary swaging process utilizing energy-controlled method is proposed, which can improve the flexibility of the process and control forming diameter of the tubes by changing the forming energy. In the swaging machine, a servo motor and its control system were used to change the speed of the rotary swaging spindle. And then, the swaging energy of the hammer die can be controlled. Rotary swaging experiments of pure copper tubes were conducted on the developed rotary swaging machine. These tubes with outer diameter of 8.0 mm and wall thickness of 1.0 mm were formed to necking tubes with different outer diameters. Meanwhile, the relationship between the speed of the spindle and the forming diameter of the formed tube was obtained. The metallographs of the formed tubes showed the compact structure and continuous streamline. To investigate the metal behavior under different energy of the hammer die, Transvalor Forge 2011 was used to simulate the rotary swaging process of tubes based on energy-controlled swaging method. The metal flows in radial, axial, and circumference directions, emerging axial elongation and necking deformation. Comparing the experimental results with the simulated ones, the deformation condition and thickness distribution are in good agreement.

Influence of Mandrel on the Performance of Titanium Tube with Cold Rotary Swaging

Study on the Influence of Mandrel Speed on the Titanium Tube Continuous Retained-Mandrel Rolling Process

Rotary Swaging Forming Process of Tube Workpieces

Microstructure and Texture of Thin-Walled Ti-6Al-4V Alloy Seamless Tubing Manufactured by Cold-Rotary Swaging

Energy-controlled rotary swaging process for tube workpiece

Investigation on the influence of mandrel on the forming quality of thin-walled tube during free bending process

Effect of annealing temperature on texture and residual stress of Ti-6Al-4V alloy seamless tubing processed by cold rotary swaging

Material Flow in Infeed Rotary Swaging of Tubes

Effect of Swaging on Young׳s Modulus of Β Ti–33.6Nb–4Sn Alloy

Role of the Mandrel in the Variable Curvature Local-Induction-heating Bending Process of B1500HS Thin-Walled Rectangular Tubes

Microstructure evolution and mechanical properties of commercial pure titanium subjected to rotary swaging

Influence of Cold-Rolling Processes on the Dimensional Accuracy and Roughness of Small-Diameter Thick-Walled Seamless Tubes

Effect of Rotary Swaging and Annealing on Mechanical Properties and Microstructure Evolution of Aeroengine High-Temperature Alloy Steel Tube

Tube/Tube Joining Technology by Using Rotary Swaging Forming Method

Stress State and Deformation Pattern During the Infeed Swaging of Tube Without Mandrel

Study on the Influence of Mandrel Type on Copper Tube Rotary Draw Bending

Effect of Rotary Swaging on Mechanical Behaviors of Axle Steel Rod

Microstructure of the Advanced Titanium Alloy VT8M-1 Subjected to Rotary Swaging

Evolution of Texture and Tensile Properties of Cold-Rotary Swaged Ti–6Al–4V Alloy Seamless Tubing after Annealing at Different Temperatures

Influence of Process Fluctuations on Residual Stress Evolution in Rotary Swaging of Steel Tubes

Research on Bending Forming Method of Large Diameter-Thickness Ratio Thin-Walled Tubes for Aerospace