Abstract:Earthquake-prone regions have seen the resilience of traditional timber-framed masonry construction systems through previous seismic events. The post-earthquake studies show that these building systems have exceptional resilience to seismic activity and can endure multiple seismic events throughout their lifespan. This performance stands out from many contemporary constructions. Although there is a significant amount of evidence regarding the distinct behavior of these structures during earthquakes, there is a limited amount of meaningful quantitative experimental data on their seismic performance. This study showcases the findings of a series of half-scale shake table experiments carried out on a single-room; single-story timber frame filled with dry bond brick masonry. Two half-scale models were created and tested on a shaking table to investigate the seismic performance of timber framed masonry structural systems. One model was left without infill, while the other was infilled with dry bond brick masonry. To analyze the dynamic behavior, both models were exposed to random base excitation. Additionally, the models were tested with gradually increasing ground motion to study their response to seismic activity, following a method known as single ground motion record incremental dynamic analysis. The evaluation focused on the dynamic characteristics, including the assessment of natural frequencies, damping, mode shapes, and stiffness degradation. The stiffness decreased to 43% of the undamaged stiffness in the model with bricks and 62% of the undamaged stiffness in the model without infill. An assessment and evaluation were conducted on the peak acceleration and displacement responses, as well as the global hysteresis response. The acceleration response was significantly higher for the model with brick infill, with an amplification of 300%. In contrast, the model without infill had a lower amplification value of 150%. According to the findings of the study, it is evident that the timber framed structure exhibits a significant level of flexibility and deformability. Additionally, the structure's ability to dissipate energy increased as the peak ground acceleration of the input ground motion increased.

Finite Element Simulation of Earthquake Resistant Brick Masonry Building Under Shock Loading

Simulation Of Collapse Process Of Masonry Walls Based On Expanded Discrete Element Method

Applied Element Modelling of the Dynamic Response of a Full-Scale Clay Brick Masonry Building Specimen with Flexible Diaphragms

Pre- and post-simulations of shake-table tests on a stone masonry building aggregate using finite-discrete elements

Analysis of Masonry Behavior on Non-engineered House Building Towards Lateral Deformation by Using Finite Element Method Based on Guidelines

Simulation of Masonry Wall using Concrete Damage Plasticity Model

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Comparative numerical study to simulate masonry with bed joint reinforced repointing

Comparative assessment of finite element macro-modelling approaches for seismic analysis of non-engineered masonry constructions

Finite element analysis of damage and failure of reinforced concrete members under earthquake loading

A block-based numerical strategy for modeling the dynamic out-of-plane behavior of unreinforced brick masonry walls

Seismic damage analysis of a brick masonry loess cave by a shaking table and FEM

Estimation of Building Damage Due to Excavation-Induced Ground Movements

Comparison of Continuous and Discrete Modeling Strategies for the Structural Assessment of a Masonry Vault Under Dynamic Seismic Loading

Dynamic Simulation Experimental Method Study About Rc Structure'S Nonlinear Performance In Earthquake Simulation Tests

Explicit Approach for the In-Plane Cyclic Behaviors of Unreinforced Masonry Structures Using Finite Particle Method

Application of Finite Element Analysis in Masonry Structures

A numerical model for non-linear dynamic analysis of masonry structures subjected to ground motion

Numerical Modeling of Masonry Infilled Reinforced Concrete Building during Construction Stages Using ABAQUS Software

Combined Finite-Discrete Element Model Simulations of Shake-Table Tests on a Full-Scale Masonry Cross Vault

Seismic behavior of timber-framed structures infilled with dry brick masonry