Abstract:Bed joint reinforced repointing is a retrofitting technique for unreinforced masonry structures that is commonly applied in the Netherlands to repair settlement-induced damage. Using this technique, the bed joints of masonry walls are reinforced with steel rebars that are embedded in a high strength repair mortar. Due to the increase of induced seismic events in the northern part of the Netherlands, an experimental study was carried out at Delft University of Technology to investigate the performance of this retrofitting technique for combined settlement and seismic loading. This paper aims to simulate the experimental results, with a focus on the comparison of different finite element modelling approaches for studying both un-strengthened and strengthened full-scale tested walls. To that end, three different models are investigated – comprising both macro (continuum) and simplified and detailed micro (brick-to-brick) modelling approaches. The bricks and mortar joints are modelled as one homogenous continuum in the macro model, whereas in the two brick-to-brick models these structural components are modelled separately, with the detailed model including interface elements to simulate the brick–mortar bonds. Nonlinear pushover analyses are subsequently carried out using all three modelling approaches, for both monotonic and cyclic loading cases. Based on these analyses, the detailed brick-to-brick model was found unsuitable to simulate the strengthened wall because cracks in the model mainly occur in the form of opening of the brick–mortar bond interfaces, while smeared cracking in the plane stress elements of the mortar joints is very limited. Similarly, the continuum damage model was found to be inaccurate when pre-existing damage in the experiment needed to be taken into account. The continuum damage model also showed lower axial stresses in the rebars, compared with the simplified brick-to-brick model, as the former does not allow for the direct assignment of material properties for the high strength repair mortar in the strengthened joints.

Applied Element Modelling of the Dynamic Response of a Full-Scale Clay Brick Masonry Building Specimen with Flexible Diaphragms

Dynamic Progressive Collapse Response of Multi-Storey Frame Structures with Masonry Infills

Simulation Of Collapse Process Of Masonry Walls Based On Expanded Discrete Element Method

Discrete Element Modeling of the Seismic Behavior of Masonry Construction

Comparative numerical study to simulate masonry with bed joint reinforced repointing

Analysis of Masonry Behavior on Non-engineered House Building Towards Lateral Deformation by Using Finite Element Method Based on Guidelines

Explicit Approach for the In-Plane Cyclic Behaviors of Unreinforced Masonry Structures Using Finite Particle Method

Numerical homogenization‐based seismic assessment of an English‐bond masonry prototype: Structural level application

Comparison of Continuous and Discrete Modeling Strategies for the Structural Assessment of a Masonry Vault Under Dynamic Seismic Loading

Modelling reinforced masonry buildings by a mechanics‐based macroelement approach

About the Use of Concrete Damage Plasticity for Modeling Masonry Post-Elastic Behavior

A Discrete Macro-Element Method (DMEM) for the nonlinear structural assessment of masonry arches

Finite Element Simulation of Earthquake Resistant Brick Masonry Building Under Shock Loading

Nonlinear finite and discrete element simulations of multi-storey masonry walls

3D hybrid modelling approach combining the finite and discrete element methods: Validation based on masonry shear wall tests

Dynamic characteristics of stone masonry walls before and after damage: Experimental and numerical investigations

Dynamic Response of Masonry Structures to Temperature Variations: Experimental Investigation of a Brick Masonry Wall

Pre- and post-simulations of shake-table tests on a stone masonry building aggregate using finite-discrete elements

2D and 3D Modelling Strategies to Reproduce the Response of Historical Masonry Buildings Subjected to Settlements

A variational event-driven approach for the dynamic analysis of multi-block historical masonry structures under ground excitation

Comparative assessment of finite element macro-modelling approaches for seismic analysis of non-engineered masonry constructions