Abstract:A series of simplified approaches are evaluated for their effectiveness to estimate the seismic vulnerability of historical masonry towers. First, collapse loads are evaluated on sixteen “idealized” benchmark cases with different slenderness and shear area. Both analytical and computational approaches are used, namely the analytical procedure proposed by the Italian Guidelines on the Built Heritage and pushover analyses conducted using the commercial codes UDEC and 3Muri. The sixteen towers are representative cases which can be encountered in practice. Their geometry is idealized into parallelepiped blocks with hollow square cross-sections, thus favoring the utilization of 2D approaches, beneficial to drastically reduce the effort required for repeated computations. In addition, a Monte Carlo MC upper bound limit analysis strategy is proposed, in order to have an insight into the possible failure mechanisms for the different cases investigated. Deliberately is avoided the introduction of any form of irregularity and they are supposed isolated from the neighboring buildings, to obtain results exclusively dependent from geometric features. Among all the possible collapse mechanisms, five of them are selected according to the probability of occurrence based on past earthquake experiences. Five million cloud points of collapse accelerations are obtained by carrying the height, slenderness and shear area of the idealized towers. The approach is very fast and allows identifying different regions where single mechanisms are active. The results are confirmed repeating MC simulations with a triangular FE upper bound limit analysis discretization of the idealized towers. A series of equations are provided in order to assist engineers and practitioners to obtain a preliminary estimation of their expected collapse acceleration. For validation purposes, the results obtained previously with refined full 3D FE models of 25 towers located in the Northern Italy are reported. Satisfactory agreement between the predictions provided by simplified methods and sophisticated analyses are obtained.

A variational event-driven approach for the dynamic analysis of multi-block historical masonry structures under ground excitation

Dynamic Progressive Collapse Response of Multi-Storey Frame Structures with Masonry Infills

Simulation Of Collapse Process Of Masonry Walls Based On Expanded Discrete Element Method

Applied Element Modelling of the Dynamic Response of a Full-Scale Clay Brick Masonry Building Specimen with Flexible Diaphragms

Applying a 2D Variational Rigid Block Modeling Method to Rubble Stone Masonry Walls Considering Uncertainty in Material Properties

ANUB-Aggregates: a fully automatic NURBS-based software for advanced local failure analyses of historical masonry aggregates

Fast Vulnerability Evaluation of Masonry Towers by Means of an Interactive and Adaptive 3D Kinematic Limit Analysis with Pre-assigned Failure Mechanisms

A block-based numerical strategy for modeling the dynamic out-of-plane behavior of unreinforced brick masonry walls

Explicit Approach for the In-Plane Cyclic Behaviors of Unreinforced Masonry Structures Using Finite Particle Method

Nonlinear finite and discrete element simulations of multi-storey masonry walls

Numerical homogenization‐based seismic assessment of an English‐bond masonry prototype: Structural level application

Scaling laws for the rigid-body response of masonry structures under blast loads

Dynamic characterization of progressively damaged segmental masonry arches with one settled support: experimental and numerical analyses

3D hybrid modelling approach combining the finite and discrete element methods: Validation based on masonry shear wall tests

Discrete Element Modeling of the Seismic Behavior of Masonry Construction

Comparison of Continuous and Discrete Modeling Strategies for the Structural Assessment of a Masonry Vault Under Dynamic Seismic Loading

Discrete macro - models of nonlinear interlocking mechanisms in the out-of-plane failure of masonry walls

A macro modelling continuum approach with embedded discontinuities for the assessment of masonry arch bridges under earthquake loading

A numerical model for non-linear dynamic analysis of masonry structures subjected to ground motion

Comparative assessment of finite element macro-modelling approaches for seismic analysis of non-engineered masonry constructions

Evaluation of different approaches for the estimation of the seismic vulnerability of masonry towers