Abstract:China is a country that suffers a lot from the earthquake disaster. The major reason for the human death and property losses in earthquake is the collapse of the tall buildings. Hence, correct simulation for the failure modes and accurate prediction for the collapse of the tall buildings under earthquake disaster is very useful for studying the safety of buildings and evaluating losses during earthquakes[1]. However, a lot of simplifications must be carried out in the existing simulations to overcome the numerical problems because the grave nonlinearity exists when collapse happens. This may lead to the results away from a real phenomenon. In this study, a fiber model for reinforced concrete (RC) structures (referred as THUFIBER) is developed, which is based on the general-purpose finite element package of MSC.MARC that carries significant capacity of solving nonlinear problems. In this model, the concrete and the reinforcement inside the structural elements are modeled respectively with different fibers as shown in figure 1 so that the cyclic behavior of material can be properly simulated. Pushover and dynamic time-history analysis for a RC frame tall building are carried out to illustrate the capacity of the proposed model. And dynamic time-history analysis is emphasized in this paper to discuss the collapse modes of the structure. The results show that THUFIBER can simulate the collapse and failure process of the structure under the dynamic loads such as complicated seismic loads, including the softening and fracture behaviors of structural elements, and further the program shows good convergence in the non-linear cases. So THUFIBER has a strong and promising ability for nonlinear analysis including collapse numerical simulation. Figure 1 Section dicretization of the fiber model Figure 2 Simulation for the Collapse of the frame

Modeling of non-ductile RC structure under near-fault ground motions: A nonlinear finite element analysis

Finite Element Modelling of Two-way RC Slabs with Varying Modelling Choices

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Finite Element Analysis of Reinforced Concrete Single-Column Bridge Bent with Flexural Failure Under Near-Fault Ground Motion

Nonlinear Modeling of the Ten-Story RC Building Structure of 2015 E-Defense Shaking Table Tests

Nonlinear FEM Analysis on RC Structural Wall with Large Eccentric Openings

Elasto-Plastic Time History Analysis on High-Rise Concrete-Filled Steel Tube(CFST)Frame-RC Core Wall Structure

NONLINEAR ANALYTICAL MODELS, METHODS AND EXAMPLES FOR CONCRETE STRUCTURES SUBJECT TO EARTHQUAKE LOADING

Seismic and Failure Behavior Simulation for RC Shear Walls under Cyclic Loading Based on Vector Form Intrinsic Finite Element

Nonlinear finite element model updating with a decentralized approach

NUMERICAL SIMULATION OF FAILURE BEHAVIOR OF REINFORCED CONCRETE FRAME STRUCTURES BY DISCRETE ELEMENT METHOD

Shaking table testing of a reinforced concrete frame retrofitted with a steel oval member equipped with rubber cylinders

Damage Inference and Residual Capacity Assessment for an E-Defense 2018 Ten-Story RC Test Structure

Lessons from the Collapse of Typical RC Frames in Xuankou School During the Great Wenchuan Earthquake

Seismic Behaviour Of Concrete-Filled Steel Tubular Frame To Rc Shearing Wall High-Rise Mixed Structures

Damage demands evaluation of reinforced concrete frame structure subjected to near-fault seismic sequences

Nonlinear FE Model for RC Shear Walls Based on Multi-Layer Shell Element and Micro-Plane Constitutive Model

Collapse Simulation of RC High-Rise Building Induced by Extreme Earthquakes

Distribution mode of hysteretic energy and damage mechanism of RC frame-shear-wall structure under strong earthquakes

Simulation for the Collapse of RC Frame Tall Buildings under Earthquake Disaster

Probabilistic Seismic Performance Assessment of Tall RC Special Moment-resisting Frame Buildings Equipped with Buckling-restrained Braces under Near-field Excitations