Abstract:Boron trace determination in biological materials is needed in different fields of application. Direct B determination by means of Graphite Furnace Atomic Absorption Spectrometry (SS-GFAAS) has been used in the past for this purpose, offering good detection limits hardly achievable by other techniques. However, such methods require the use of high atomization temperatures combined with large integration times to promote B atomization, which dramatically reduces the lifetime of the instrument's graphite parts. In this work, a new perspective for B determination by means of Graphite Furnace Molecular Absorption Spectrometry (GFMAS) is proposed. B was detected as the diatomic molecule BF (boron monofluoride), deploying a gas phase reaction with CH3F as fluorinating agent. Based on this strategy, a method for the direct determination of B in two biological certified reference materials (NIST SRM 1570a spinach leaves and NIST SRM 1573 tomato leaves) has been developed, providing similar detection capabilities to the GFAAS method (LOD of 0.24 ng) but requiring much milder furnace conditions. Moreover, the appearance of memory effects, very common in GFAAS methods, is also avoided with this method. Straightforward calibration with aqueous standards was also found to be possible. To this end, a mixture of W (permanent), citric acid, and Ca as chemical modifiers was found to be essential for obtaining a reproducible and sufficiently sensitive signal for boron solutions, comparable to the signals obtained for the solid samples. With this method, accurate results were obtained for the direct analysis of both certified reference materials, provided that spectral interferences from the PO molecule were properly corrected. Precision values in the range of 15% RSD, as typically reported for direct solid sampling GFAAS, were found. Finally, and as an additional advantage of the GFMAS method, a large isotopic shift in the absorbance of the 10BF and 11BF molecules can be accurately monitored at a secondary transition for the BF molecule. This offers novel analytical possibilities for the method, which are also explored in this study. In this regard, control of the B concentration was found to be critical for obtaining accurate and precise isotope ratios for this element.

Determination of chlorine in bismuth and bismuth oxide by atomic absorption spectrometry and laser mass spectrometry

Determination of Bismuth in Sediment and Soil by Ultrasonic Slurry Sampling Electrothermal Atomic Absorption Spectrometry

Determination of bismuth in river sediment by electrothermal atomic absorption spectrometry with low-temperature atomization in argon/hydrogen

Determination of Bismuth in Solid Samples by Hydride Generation Atomic Fluorescence Spectrometry with a Dielectric Barrier Discharge Atomizer

Study of the oxidation process of bismuth nanoparticles using NaClO

Determination of Chloride and Bromide in La_2Ov_3 by Subsidence Separation-Ion Chromatography

Determination of Boron with Molecular Emission Using Laser-Induced Breakdown Spectroscopy Combined with Laser-Induced Radical Fluorescence

Slurry Sampling Thermospray Flame Furnace Atomic Absorption Spectrometric Determination of Bismuth in Water and Geological Samples Combined with Ultrasound-Assisted Dispersive Micro Solid Phase Extraction

Insights into the nucleation and growth of BiOCl nanoparticles by in situ X-ray pair distribution function analysis and in situ liquid cell TEM

Determination of bismuth in environmental samples by slurry sampling graphite furnace atomic absorption spectrometry using combined chemical modifiers

Study on Azomethine-H Acid Spectrophotometry for Determination of Boron in Brines with High MgCl2 Content

Analytical Control over the Preparation of Pure Antimony

Chlorine and Sulfur Determination in Water Using Indirect Laser-Induced Breakdown Spectroscopy.

A new supramolecular based liquid solid microextraction method for preconcentration and determination of trace bismuth in human blood serum and hair samples by electrothermal atomic absorption spectrometry

Direct Determination of Trace Metals in Boron Carbide by Slurry Introduction Axial Viewed Inductively Coupled Plasma Optical Emission Spectrometry

Substituted bismuth vanadates and chromates: New aspects

Determination of trace amount of bismuth(III) by adsorptive anodic stripping voltammetry at carbon paste electrode

Isotope Determination of Lead and Bismuth by Pulsed Laser Evaporation and Resonance Ionization Time-of-flight Mass Spectrometry

Boron elemental and isotopic determination via the BF diatomic molecule using high-resolution continuum source graphite furnace molecular absorption spectrometry

The Determination of Boron by Inductively Coupled Plasma Atomic Emission Spectroscopy. Part 2. Applications to South African Environmental Samples

Determination of trace bismuth by using a portable spectrometer after ultrasound-assisted dispersive liquid–liquid microextraction