Abstract:Titanium matrix composites (TMC) have potential applications in the aerospace industry because of their excellent performance. The comprehensive performance of TMC mainly depends on the matrix, reinforcement and interface characteristics. Hence, this study discussed the knowledge of microstructure-property relationships in detail. Crack-free high-mass-proportion TiCp/Ti6Al4Vcomposites were successfully prepared by directed energy deposition (DED). As the TiCp mass fraction increasing from 0 to 50%, the quantity of primary TiC and unmelted TiC (UMT) increased. Meanwhile, the refined α-Ti in the composites had a relatively weak texture. In addition, the interface between primary TiC and α-Ti was a semi-coherent interface, exhibiting a <math>112-0</math> α-Ti // [110]TiC, <math>1-100</math> α-Ti // <math>1-11</math> TiC orientation relationship, which facilitated the heterogeneous nucleation of Ti and improved bonding of primary TiC with the matrix. With the increase in microhardness taking the form of a cubic function, the wear mechanism was found to transform from abrasive wear to slight delamination wear. Due to the fact that both UMT and primary TiC bonded well with Ti64 matrix, they shared partial friction to protect matrix from severe abrasion, resulting in an excellent wear resistance of composites. Moreover, the thermal conductivity of 50% TiCp/Ti6Al4V was 9.063 <math>W∙m-1∙K-1</math>, which was nearly 26.5% higher than that of Ti6Al4V. Owing to the premature cracking of brittle UMT and dendritic TiC, the tensile strength and elongation of the composite with 50% TiCp were 515.5 MPa and 1.83%, which decreased by 45.8% and 78.8%, respectively. Adding a high proportion of TiCp can significantly improve the hardness and wear resistance of TMC, whereas it is detrimental to the tensile performance of TMC. The study have significant implications for the design of novel TMC, particularly for the aerospace industrial applications.

First principles application for mechanical properties of Ti-doped W particles enhanced U matrix composite

Tensile Properties and Fracture Mechanism of the Ti2AlC(0001)/TiAl(111) Interface: Insights from a First-Principles Study

Adhesion, bonding and tensile properties of Ti doped WC (001)/diamond (111) interface: A first-principles calculation

First-principles study on stability, adhesion and fracture properties of ZrO2/W interface in composite materials

Interfacial structure of WC-Fe metal-matrix composite (WC/Fe3W3C and Fe/Fe3W3C) stability, electronic and mechanical properties from first-principles calculations

Experimental and first-principles study on TiB/TiC interface in hybrid (TiB+TiC)/Ti6Al4V composite

First-principles Calculations of Mechanical and Thermodynamic Properties of Tungsten-Based Alloy

First-principles calculations on interfacial properties and fracture behavior of the Mg ( 1 1 ̄ 01 ) ||TiC ( 1 1 ̄ 1 ) interfaces

First principles calculation of interfacial stability, electronic and mechanical properties of WC-304 cemented carbides

Interface properties of Ti3SiC2/Al2O3 ceramics: Combined experiments and first-principles calculations

Investigation on microstructure and reinforcement mechanism of the TiC-reinforced W-matrix composite prepared by high-energy ball milling and spark plasma sintering

Chemical bonding, thermodynamic stability and mechanical strength of Ni3Ti/α-Al2O3 interfaces by first-principles study

First principles study on heterogeneous interfaces of TiCu alloys through aluminum addition

Adhesive and tensile properties of diamond(001)/TiC(111) interfaces: A first-principles investigation

First principles calculations on Al/TiB 2 interfaces

First-principles simulations of metal-ceramic interface adhesion: Co/WC versus Co/TiC

High-mass-proportion TiCp/Ti6Al4V titanium matrix composites prepared by directed energy deposition

Interface alloying design to improve the stability and cohesion of W/HfC interface by first-principles study

Tensile properties and fracture mechanism of the Ti 2 AlC(0001)/TiAl(111) interface: Insights from a first-principles study

Insight into interface cohesion and impurity-induced embrittlement in carbide dispersion strengthen tungsten from first principles

First-principles calculations of the effects of the interface microstructure on the wettability of a Cu–Ti/AlN system