Abstract:Hydronic thermal barriers with ultra-low carbon emission attributes are progressively gaining prominence in the competition of thermal insulation solutions for opaque envelopes of low-energy buildings due to their excellent thermal performance and low-grade energy utilization potential. This paper introduces a novel approach involving a modular hydronic thermal barrier wall (MHTB) that incorporates preset pipe cavities and replaceable filling material. This proposition seeks to address the challenges confronted by conventional hydronic thermal barrier walls (CHTBs), specifically in terms of internal heat transfer enhancement and rapid assembly/dismantling. On-site thermal performance tests and energy-saving evaluations were conducted in summer conditions based on three scaled-down rooms with MHTB, CHTB and a conventional external insulation wall as the south walls. The results showed that the MHTB could significantly reduce heat passing through the south wall in summer, resulting in a decreased cooling load attributed to the wall and subsequently lowering indoor temperatures. At a charging temperature of 17.0 °C, the MHTB exhibited a reduction of 11.3 °C in interior surface temperature compared to the conventional external insulation wall, accompanied by a corresponding increase of 2.76 kWh·m −2 in cumulative heat flux. In addition, the MHTB could effectively mitigate inhomogeneous heat transfer within the wall, enhancing the overall heat transfer effect . Across the four investigated conditions, the MHTB with a steel grit-sand mixture as the filling material demonstrated an approximate 4.7% increase in cumulative heat flux and a 12.2% enhancement in cumulative cooling quantity compared to the CHTB. Overall, the findings substantiated the efficacy of the MHTB system and offered a crucial point of reference for advancing research in optimizing the performance and modular construction of hydronic thermal barrier walls.

Comparison between Heat Flow Meter (HFM) and Thermometric (THM) Method for Building Wall Thermal Characterization: Latest Advances and Critical Review

In-situ measurement of thermal transmittance of building walls: Evaluation of stored heat flux in heavy-weight walls during the cooling season

Comparison between Direct and Indirect Heat Flux Measurement Techniques: Preliminary Laboratory Tests

A Novel Response Factor-Based Method for in Situ Measurement of Wall Thermal Resistance

In situ methodology for thermal performance evaluation of building wall: A review

Experimental validation and uncertainty analysis of an innovative IoT infrared sensor for in-situ wall thermal transmittance measurement

Quantitative thermography for the estimation of the U-value: state of the art and a case study

A New Metre for Cheap, Quick, Reliable and Simple Thermal Transmittance (U-Value) Measurements in Buildings

Investigation into the use of thermoelectric modules as an alternative to conventional fluxmeters: Application to convective and radiative heat flux in buildings

Non-Destructive Possibilities of Thermal Performance Evaluation of the External Walls

Quantitative internal infrared thermography for determining in-situ thermal behaviour of façades

Modeling Analysis and Experimental Study of a Temperature-difference Type Heat Flux Meter

In-situ virtual heat flow meter model for monitoring heat flux of existing building envelope

Numerical and experimental analysis of building walls thermal performance

A systematic review of methods for evaluating the thermal performance of buildings through energy simulations

Thermal Performance Of Building Under Two Ideal Heating Patterns

Computational characterisation of the heat flow meter method applied to moist bio-based insulating building materials

PRACTICAL MEASUREMENT AND ANALYSIS ON EXTERNAL WALL HEAT ENGINEERING PERFORMANCE OF NEW AND OLD CIVILIAN HOUSES

Summer thermal and energy performances assessment of a modular hydronic thermal barrier wall for ultra-low energy buildings - A field experimental study

Thermal performance of radiant heating floors in furnished enclosed spaces

Thermal performance evaluation of the wall using heat flux time lag and decrement factor