An in-situ detection method for assessing the thermal transmittance of building exterior walls using unmanned aerial vehicle–infrared thermography (UAV-IRT)
Dongjie Zhang,Changhong Zhan,Lin Chen,Yongjie Wang,Guanghao Li
DOI: https://doi.org/10.1016/j.jobe.2024.109724
IF: 7.144
2024-05-28
Journal of Building Engineering
Abstract:In-situ testing of the thermal transmittance of exterior walls is crucial for building energy audits, insulation retrofitting, and energy consumption monitoring. The existing testing methods suffer from drawbacks related to stringent testing conditions, time consumption, and extensive workloads. This study proposes an in-situ method for testing the thermal transmittance of exterior walls using unmanned aerial vehicle (UAV) infrared thermography (IRT). The results were validated through four in-situ tests on two buildings from different eras using a heat flow meter. The results indicated that as the testing distance was increased by the UAV, the test values for the thermal transmittance in the region of interest (ROI) on the walls gradually decreased with an increase in the number of errors. Compared with the dynamic calculation results, the minimum testing errors at a 15 m distance for the A05 and N09 apartments were 17.8 % and 5.8 %, respectively. At testing speeds of 0.5 m/s and 1.5 m/s, the changes in average temperature and heat flux at the ROI of the A05 and N09 apartments were less than 0.5 °C and 0.5 W/m 2 , respectively, and the changes in the thermal transmittance test values were less than 2 % for both. In outdoor environments with wind speeds ranging from 0.2 to 1.5 m/s, the average temperature at the ROI decreased with increasing wind speed as the heat flux increased. The testing error for the thermal transmittance at the east-facing wall of the N09 apartment ROI increased from 2.2 % to 25.2 %. In summary, under outdoor wind speeds below 0.4 m/s at 15 m from the exterior wall and with a flight speed of 0.5 m/s, the horizontal stripe flight path was found to be the most suitable for testing the wall thermal transmittance. This approach enables fast, cost-effective, and efficient monitoring of the thermal performance of building envelope structures.
construction & building technology,engineering, civil