Abstract:Permeability and heat transport through building materials ultimately dictates their insulatory performance over a buildings service lifetime. Experiments combining XCT with numerical modelling are an accepted method of studying pore scale processes and have been used extensively in the oil and gas industry to study highly complex reservoir rocks. However, despite the obvious similarities in structure and application, these techniques have not yet been widely adopted by the building and construction industry. An experimental investigation was performed on the pore structure of several building materials, including conventional, historic, and innovative, using XCT and direct numerical simulation. Six samples were imaged at between a 4 and 15 micron resolution inside a micro-CT scanner. The porosity and connectivity were extracted with the grain, throat, and pore size distributions using image analysis. The permeability, velocity, and thermal conductivity were then investigated using GeoChemFoam, our highly-versatile and open source numerical solver. It was found that each material had a unique, heterogeneous and sometimes multi-scale structure that had a large impact on the permeability and thermal conductivity. Furthermore, it was found that the method of including sub-resolution porosity directly effected these bulk property calculations for both parameters, especially in the materials with high structural heterogeneity. This is the first multi-scale study of structure, flow and heat transport on building materials and this workflow could easily be adapted to understand and improve designs in other industries that use porous materials such as fuel cells and batteries technology, lightweight materials and insulation, and semiconductors.

Computational characterisation of the heat flow meter method applied to moist bio-based insulating building materials

The prediction of effective thermal conductivities perpendicular to the fibres of wood using a fractal model and an improved transient measurement technique

Heat and Moisture Transfer in Wall-to-floor Thermal Bridges and Its Influence on Thermal Performance

Application of the Darcy and Richards equations for modelling of water capillary rise in building materials

Development of an Analytical Method for Simultaneous Heat and Moisture Transfer in Building Materials Utilizing Transfer Function Method

Effective thermal conductivity of moist aerated concrete with different porosities

Experimental Measurements of Thermal Conductivity of Wood Species in China: Effects of Density, Temperature, and Moisture Content

Methodology for measuring the thermal conductivity of insulating samples with small dimensions by heat flow meter technique

Thermal properties of wood: measurements by transient plane source method in dry and wet conditions

Investigation into the use of thermoelectric modules as an alternative to conventional fluxmeters: Application to convective and radiative heat flux in buildings

Heat, mass and momentum transport in wet mineral-wool insulation: Experiment and simulation

Measurements of specific heat capacity of common building materials at elevated temperatures: a comparison of DSC and HDA

Experimental Investigation on Thermal Conductivity of Straw Boards Based on the Temperature Control Box—Heat Flux Meter Method

Thermal Conductivity and Moisture Absorption of Biomass Materials as Thermal Insulators

Assessment Method of Numerical Prediction Models for Combined Heat, Air and Moisture Transfer in Building Components: Benchmarks for One-dimensional Cases

A mixed experimental–numerical electrical resistivity-based method for moisture content assessment in wood tested using the example of Douglas fir

On the solution of coupled heat and moisture transport in porous material

Numerical Modeling and Experimental Study of Heat Transfer in Ceramic Fiberboard

Simultaneous estimation of hygrothermal properties of a prefabricated lightweight wall using one-year on-site measurements to solve inverse problems

Multi-scale flow, permeability, and heat transport in low-carbon and traditional building materials

Effects of Considering Moisture Hysteresis on Wood Decay Risk Simulations of Building Envelopes