Abstract:Although straw is being utilized as an additive in construction materials, the thermal properties of straw and building materials in combination are insufficient. The thermal properties of straw–mortar composite materials can be improved by the pretreatment of straw. The alkali treatment enhances the mechanical attachment between the fibers and the matrix material, assuring that the straw–mortar composite materials have solid thermal insulation characteristics. Pretreatment with sodium hydroxide was utilized in this work to enhance the thermal properties of straw–mortar composite materials. This study mainly investigated the thermal properties of straw–mortar composite material after sodium hydroxide pretreatment and its change rules under the condition of the freeze–thaw cycle. A three-factor, three-level Box–Behnken experimental design, with the straw content (%), pretreatment time (min), and reagent concentration (%) as process parameters, was used. The response variables were the thermal conductivity, thermal diffusivity, and thermal resistance. The findings revealed that all of the variables had a substantial impact on the replies. Optimization parameters of 17.95% for the straw content, 19.50 min for the pretreatment time, and 4.99% for the reagent concentration for the straw–mortar composite materials were achieved. A thermal conductivity of 0.211 W·(m·K)−1, a thermal diffusivity of 0.277 mm2·s−1, and a thermal resistance of 57.211 K·W−1 were the optimal thermal property indices. Furthermore, during the freeze–thaw cycle, the thermal conductivity coefficient and thermal diffusion coefficient of the combined pretreatment composite were 26% and 9% lower than the materials without the treatment. The thermal performance of the mortar composites prepared by alkali-treated straw was better than that prepared by untreated straw.

Experimental Investigation on Thermal Conductivity of Straw Boards Based on the Temperature Control Box—Heat Flux Meter Method

Thermal Performance of Cross-Laminated Timber (CLT) and Cross-Laminated Bamboo and Timber (CLBT) Panels

Heat and Moisture Transfer in Wall-to-floor Thermal Bridges and Its Influence on Thermal Performance

Experimental Study on the Thermal Conductivity of Rice Straw Measured by Thermal Probe

Hot box method to investigate U-values for straw bale walls with various structures

Computational characterisation of the heat flow meter method applied to moist bio-based insulating building materials

Experiments for Comparing the Hygroscopicity of Straw Panel with Other Hygroscopic Building Materials

Analysis of moisture buffering effect of straw-based board in civil defence shelters by field measurements and numerical simulations

A numerical investigation to analyze the effect of changing ambient conditions on accurate and stable identification of thermal conductivity of ground source heat pump system using thermal response test

Thermal performance study of straw concrete external walls for rural residences in hot-summer and cold-winter zone of China

Influence of Participating Radiation on Measuring Thermal Conductivity of Translucent Thermal Insulation Materials with Hot Strip Method

A long-term monitoring study on the thermal comfort and durability of a straw bale Passivhaus cottage

Numerical Study of the Influence of Thermal Radiation on Measuring Semi-Transparent Thermal Insulation Material with Hot Wire Method

Numerical Modeling and Experimental Study of Heat Transfer in Ceramic Fiberboard

Performance Study of Lightweight Insulating Mortar Reinforced with Straw Fiber

Prediction of thermal behavior of Earthen-Straw composite material with 3D numerical modeling of a random geometry without overlapping

Preparation and Characterization of a Type of Green Vacuum Insulation Panel Prepared with Straw Core Material

Elaboration of a Straw Fiber-Based Insulated Material: Numerical Prediction of Thermohydromechanical Properties

A Novel Method for Full-Scale Measurement of the External Convective Heat Transfer Coefficient for Building Horizontal Roof

Optimization Research of Sodium Hydroxide Pretreatment to Enhance the Thermal Properties of Straw–Mortar Composite Materials

Numerical prediction of effective thermal conductivity of ceramic fiber board using lattice Boltzmann method