Abstract:To determine thermal parameters of porous building materials for building thermal and energy analysis, an experimental study is presently carried out, which applies constant relative humidity controlled by the saturated salt-water solution under isothermal conditions. The principle of isothermal vapor sorption is discussed and the method for temperature and humidity control is proposed. Experiments are first performed using the routine materials of concrete, mortars, and clay brick whose experimental data widely existed in the previous studies, to confirm the present experimental work. Insulation materials of expanded polystyrene, extruded polystyrene, and polyurethane are tested for determining their water vapor permeability and isothermal sorption. These materials are considered due to the fact that they are mostly used as building insulation materials in China but lack thermal-hygro parameters for actual applications. The humidity-bound ranges 11.3—96.7%, which basically covers the whole range of building thermal-hygro environment is encountered. The least square method is used to fit the experimental data obtained, and finally to present regression equations for the three materials. Results of this study are expected to provide key parameters for the model of heat and moisture transfer in the materials for real buildings in hot-summer and cold-winter regions of China, where the transfer of moisture is exhibited significantly in building energy.

SUPPLEMENTARY EXPERIMENT INVESTIGATION ON THERMAL CONDUCTIVITY MEASURED BY STEADY-STATE PLATE METHOD

Experimental Study on Thermal Conductivity of Mixed Materials of Sand and Bentonite

Experimental Study on Thermal Conductivity Measurement of Wet Unconsolidated Porous Media

Moving Solid-Liquid Interface-Based Measurement Method for Thermal Conductivity Determination of Phase Change Materials in Liquid Phase

EXPERIMENTAL STUDY OF THERMAL CONDUCTIVITY MEASUREMENT WITH HOTDISK

Analysis on the Influencing Factor of Stable Flat Measuring Method for Thermal Conductivity Measurement

The Simulation of Thermal Insulation Property of Ceramic Fibers

The Principle To Measure Thermal Conductivity By A New Thermal Probe Method

Experimental study on measurement accuracy of hot disk thermal constants analyser

Thermal Conductivity Measurement of Consolidated Adsorbent

Experimental Studies on Coefficient of Thermal Conductivity of Silty Clay

Investigation On The Thermal Conductivity Of Shanghai Soft Clay

An Experimental Study on Thermal Conductivity of Concrete

RESEARCH ON EFFECTIVE THERMAL CONDUCTIVITY OF ENERGY STORAGE SYSTEM WITH SOLID-LIQUID PHASE CHANGE BY NUMERICAL ANALYSIS AND EXPERIMENTS

Principle of Measuring Thermal Conductivity Based on Steady-state Method

Numerical and Experimental Studies on the In-Situ Measurement of Thermal Conductivity of the Thermal Barrier Coating

Researches on Thermal Conductivity Measurement of Insulating Material by Improved Parallel Hot-wire Method

Thermal Conductivity Estimation of Thermal Insulating Materials and Its Application on Engine Exhaust Pipe

Design and Construction of a New Steady-State Apparatus for Medium Thermal Conductivity Measurement at High Temperature

Experiment on Thermal Conductivity Enhancement for PCM Embedded in Metal Foam

Experimental Investigation of Hygrothermal Parameters of Building Materials under Isothermal Conditions