Abstract:Elucidating the synergistic effect of wax and hydrates, involving formation, aggregation and deposition, is imperative to the operation and transportation safety for offshore petroleum fields. To understand the characteristics and mechanism of synergistic deposition of wax and hydrates, flow and deposition experiments of systems with different wax contents (0∼2.89 wt.%), initial flow rates, pressures and temperatures were conducted in a high pressure visual flow loop. According to the flow rate and pressure drop data as well as the visual window observation, four different types of plugging scenarios of wax-hydrate coexisting systems with different flow properties and wall deposition state were summarized, including rapid plugging, transition plugging, gradual plugging type I and gradual plugging type II. Compared with the wax-free system after hydrate formation, even with the addition of anti-agglomerant (AA) with the same concentration, wax-hydrate coexisting systems could not reach stable hydrate slurry flow state, indicating that the existence of wax deteriorated the performance of AA. Aside from the influence of wax crystals on hydrate agglomeration, it was found that wax deposition layer would alter the adhesion and bedding of hydrates, resulting in the variation of flow properties and wall deposition state. For low wax content systems (0.75 wt.%) where rapid plugging occurred, the synergistic effect between wax and hydrates promoted the formation of wax-hydrate coupling aggregates, resulting in severe local deposition when the coupling aggregates attained critical deposition size and consequently decreasing flow rate, forming a vicious circle of decreasing transportability. Since bedding of coupling aggregates was hindered by the uniformly coated wax deposition layer on pipe wall, gradual plugging rather than rapid plugging occurred in medium wax content systems (1∼1.25 wt.%), predominately caused by the gradual increment in viscosity of waxy hydrate slurry. For relatively high wax content systems (2.89 wt.%), hydrate formation and plugging did not occur, due to the insulation effect of wax deposition layer. A physical model for the synergistic deposition of wax and hydrates was also presented, which was meaningful to the development of a mathematical model for the prediction of blockage formation and risk analysis.

Experimental Investigation Of Wax Deposition At Different Deposit Locations Through A Detachable Flow Loop Apparatus

Effect of operating conditions on wax deposition in a laboratory flow loop characterized with DSC technique

Experimental Study on Wax Deposition in Model Loop

Experimental study on wax deposition of highly paraffinic oil in intermittent gas-oil flow in pipelines

Investigation of wax deposition and effective diffusion coefficient in water-in-oil emulsion system

Experimental Study on the Effect of Wax Crystal-Water Droplet Aggregations on Wax Deposition of Water-in-Oil Emulsions

Wax deposition modeling in oil-water stratified pipe flow

Study on Wax Deposition Process of Crude Oil System under Shear Flow Field Conditions

Investigation on Synergistic Deposition of Wax and Hydrates in Waxy Water-in-Oil (W/O) Flow Systems

Progress and Perspectives of Wax Deposition in Oil-Gas Systems: A Review

Investigating hydrate formation and flow properties in water-oil flow systems in the presence of wax

Wax Deposition Law under a Gas–Liquid Bubbly Flow Pattern

Role of a Nanocomposite Pour Point Depressant on Wax Deposition in Different Flow Patterns from the Perspective of Crystallization Kinetics

Prediction for wax deposition in oil pipelines validated by field pigging

Establishment and Application of Heat Flow Coupling Model

Study of Wax Deposition Pattern of High Wax-Bearing Crude Oil Based on Cold Finger Experiment

Dynamic Experimental Study on the Paraffin Deposition Prevention Performance of Tungsten Alloy Coating Pipe in Simulating Vertical Wellbore

Investigation on the mechanism of wax deposition inhibition induced by asphaltenes and wax inhibitors

Investigation on the condensate gas composition variation and wax deposition mechanism during temperature-induced phase transition process

Validating Heat-Transfer-Based Modeling Approach for Wax Deposition from Paraffinic Mixtures: An Analogy with Ice Deposition

Cold damage from wax deposition in a shallow, low-temperature, and high-wax reservoir in Changchunling Oilfield