Abstract:Elucidating the synergistic effect of wax and hydrates, involving formation, aggregation and deposition, is imperative to the operation and transportation safety for offshore petroleum fields. To understand the characteristics and mechanism of synergistic deposition of wax and hydrates, flow and deposition experiments of systems with different wax contents (0∼2.89 wt.%), initial flow rates, pressures and temperatures were conducted in a high pressure visual flow loop. According to the flow rate and pressure drop data as well as the visual window observation, four different types of plugging scenarios of wax-hydrate coexisting systems with different flow properties and wall deposition state were summarized, including rapid plugging, transition plugging, gradual plugging type I and gradual plugging type II. Compared with the wax-free system after hydrate formation, even with the addition of anti-agglomerant (AA) with the same concentration, wax-hydrate coexisting systems could not reach stable hydrate slurry flow state, indicating that the existence of wax deteriorated the performance of AA. Aside from the influence of wax crystals on hydrate agglomeration, it was found that wax deposition layer would alter the adhesion and bedding of hydrates, resulting in the variation of flow properties and wall deposition state. For low wax content systems (0.75 wt.%) where rapid plugging occurred, the synergistic effect between wax and hydrates promoted the formation of wax-hydrate coupling aggregates, resulting in severe local deposition when the coupling aggregates attained critical deposition size and consequently decreasing flow rate, forming a vicious circle of decreasing transportability. Since bedding of coupling aggregates was hindered by the uniformly coated wax deposition layer on pipe wall, gradual plugging rather than rapid plugging occurred in medium wax content systems (1∼1.25 wt.%), predominately caused by the gradual increment in viscosity of waxy hydrate slurry. For relatively high wax content systems (2.89 wt.%), hydrate formation and plugging did not occur, due to the insulation effect of wax deposition layer. A physical model for the synergistic deposition of wax and hydrates was also presented, which was meaningful to the development of a mathematical model for the prediction of blockage formation and risk analysis.

Investigation on the mechanism of wax deposition inhibition induced by asphaltenes and wax inhibitors

Probing the interaction between asphaltene-wax and its effects on the crystallization behavior of waxes in heavy oil via molecular dynamics simulation

Effect of Heavy Constituent in Crude Oil on Wettability Change of Sandstone

Influence of Asphaltene Aggregation State on the Wax Crystallization Process and the Efficiency of EVA as a Wax Crystal Modifier: A Study Using Model Systems

Molecular dynamics simulation of deposition of high waxy crude oil on different pipeline walls

Wax crystal dynamics and viscosity abnormal reduction in asphaltene-containing waxy oil at low temperatures

Effect of a Coated Wall on Wax–Asphaltene Molecule Diffusion, Aggregation, and Adhesion Mechanism: A Molecular Dynamics Simulation Study

Inhibiting wax deposition using palm oil additives

Influence of Asphaltenes on Hydrate Formation and Decomposition in Water-in-Waxy Oil Emulsions

Effect of a new nano‐viscosity reducing agent on the rheological properties and wax deposition characteristics of waxy crude oil

Experimental Study on the Effect of Wax Crystal-Water Droplet Aggregations on Wax Deposition of Water-in-Oil Emulsions

Experimental study on wax deposition of highly paraffinic oil in intermittent gas-oil flow in pipelines

Molecular Dynamics Simulation of Waxy Crude Oil Multiphase System Depositing and Sticking on Pipeline Inner Walls and the Micro Influence Mechanism of Surface Physical–Chemical Characteristics

Optimizing the low‐temperature performance of high‐wax‐content crude oil with emulsion‐based wax inhibitors: Mechanisms and efficacy

Investigation of wax deposition and effective diffusion coefficient in water-in-oil emulsion system

Effect of Wax Composition and Shear Force on Wax Aggregation Behavior in Crude Oil: A Molecular Dynamics Simulation Study

Study on the Kinetic Process of Asphaltene Precipitation during Crude Oil Mixing and Its Effect on the Wax Behavior of Crude Oil

Effect of doped emulsifiers on the morphology of precipitated wax crystals and the gel structure of water-in-model-oil emulsions

Investigation on Synergistic Deposition of Wax and Hydrates in Waxy Water-in-Oil (W/O) Flow Systems

Influence of Thermal Treating Temperature on the Performance of EVA Wax Inhibitor for Changqing Shale Oil

Analysis of Wax Formation Mechanism and Anti Wax Effect of Oil Well Tubing in a Certain Oilfield