Abstract:During the production of crude oil, asphaltenes are prone to precipitate due to the changes of external conditions (temperature, pressure, etc.). Therefore, a series of research studies were designed to investigate the effect of temperature on asphaltene precipitation for two Xinjiang crude oils (S1, S2) so as to reveal the mechanism of asphaltene dissolution. First, the changes of asphaltene precipitation were intuitively observed by using a microscope. The results demonstrated that the asphaltene solubility increased with the increase of temperature and the dispersion rate of asphaltene particles increased with the decrease of particle size. Second, the variation of asphaltene precipitation with temperature was quantified by a gravimetric method. The results suggested that the different asphaltenes showed different sensitivity to temperature within the temperature range 25-120 °C. Third, a hypothesis was proposed to explain these results and proved that the asphaltene aggregate structure was an important factor for asphaltene stability. The crystallite parameters of asphaltenes were obtained by X-ray diffraction (XRD) to describe the structural characteristics. The results revealed that the layer distance between aromatic sheets (d m ) of asphaltenes derived from S1 oil and S2 oil were 0.378 and 0.408 nm, respectively, which implied that the asphaltene aggregates derived from S2 oil were looser than those of S1 oil. Therefore, high temperature could facilitate the penetration of resins into asphaltene aggregates and ultimately improve the dispersion of asphaltenes. Finally, molecular dynamics (MD) simulation was used to verify the conclusions. Based on the molecular dynamics method, asphaltene aggregate models were developed. The compactness and internal energy of each model were calculated. The results showed that the asphaltene dispersion capability was proportional to the porosity and internal energy.

Wax crystal dynamics and viscosity abnormal reduction in asphaltene-containing waxy oil at low temperatures

Probing the interaction between asphaltene-wax and its effects on the crystallization behavior of waxes in heavy oil via molecular dynamics simulation

Investigation on the mechanism of wax deposition inhibition induced by asphaltenes and wax inhibitors

Study on the Kinetic Process of Asphaltene Precipitation during Crude Oil Mixing and Its Effect on the Wax Behavior of Crude Oil

Influence of Asphaltene Aggregation State on the Wax Crystallization Process and the Efficiency of EVA as a Wax Crystal Modifier: A Study Using Model Systems

Characterization of wax precipitation in wax-doped asphalt binders by variable-temperature polarized light microscope and improved viscosity algorithm

Effect of Wax Composition and Shear Force on Wax Aggregation Behavior in Crude Oil: A Molecular Dynamics Simulation Study

Effect of Temperature on Asphaltene Precipitation in Crude Oils from Xinjiang Oilfield

Separation of wax fraction in asphalt binder by an improved method and determination of its molecular structure

Experimental Study on the Effect of Wax Crystal-Water Droplet Aggregations on Wax Deposition of Water-in-Oil Emulsions

Study on microstructure evolution of waxy crude oil emulsions under dynamic cooling conditions

Effect of molecular structure on low-temperature properties of bitumen based on molecular dynamics

Effect of doped emulsifiers on the morphology of precipitated wax crystals and the gel structure of water-in-model-oil emulsions

Effects of crystalline wax and asphaltene on thermoreversible aging of asphalt binder

Effect of a new nano‐viscosity reducing agent on the rheological properties and wax deposition characteristics of waxy crude oil

Molecular insights into the dispersibility of asphaltene and crude oil rheological properties under the effect of multi-alkylated aromatic amides

Molecular dynamics simulations of aggregation and viscosity properties of model asphaltene molecules containing a polycyclic hydrocarbon nucleus with toluene additive under shear interactions

Experimental and simulation insights on the high viscosity of heavy oil I: Low-concentration compounds

Characterization of the Precipitation Modes of Paraffin Wax in Water-in-Model-Oil Emulsions

Synergistic Effect of Asphaltene, Resin, and Wax Improving the Emulsification and Interfacial Properties of a High-Phase-Inversion Thin Oil

Non-Newtonian Steady Shear Flow Characteristics of Waxy Crude Oil