Abstract:Compared with traditional hot mix asphalt (HMA), wax based warm mix asphalt (WWMA) can be mixed with the aggregate at a lower temperature and achieve the desired compaction. However, the adhesion performance of WWMA on aggregate is uncertain. To evaluate the adhesion performance of asphalt and aggregate, researchers used contact angle test, pull-off test, and ultrasonic washing experiments. However, these tests cannot adequately explain the microscopic mechanism of the interface between asphalt and aggregate. Molecular dynamics (MD) can better explain the adhesion mechanism of asphalt aggregates because they can be simulated at the molecular scale. So, the purpose of this research is to use the MD method to study the adhesion performance between WWMA and aggregate. Two aggregate oxides (CaCO3 and SiO2) models, the matrix asphalt model and WWMA models, were built in Materials Studio (MS) software. The adhesion work of asphalt and aggregate oxides was calculated. With the increase of wax modifier content, the adhesion work of asphalt and aggregate oxides (CaCO3 and SiO2) first increases and then decreases. When the wax modifier is increased to 3 wt%, the adhesion works of the WWMA-SiO2 and WWMA-CaCO3 increase by 31.2% and 14.0%, compared with that of matrix asphalt. In this study, the accuracy of the MD calculation result was verified by the pull-off experiments and the contact angle experiments. WWMA was prepared by a high-shear mixer emulsifier. In the pull-off experiments and the contact angle experiments, the tensile strength and the adhesion work between the aggregate and the asphalt containing 3% wax modifier reaches peak values. These values are 140.7% and 124.9%, compared with those between the aggregate and the matrix asphalt. In addition, the results of the pull-off experiments and the contact angle experiments are in good agreement with that of the MD simulation. Finally, Fourier transform infrared spectroscopy (FTIR) shows that the carbonyl content of WWMA is greater than that of matrix asphalt. It explains well that the wax modifier promotes the adhesion between asphalt and aggregate. This paper provides an important theoretical basis to understand the adhesion performance of WWMA and aggregate.

Separation of wax fraction in asphalt binder by an improved method and determination of its molecular structure

Investigation of high-density polyethylene pyrolyzed wax for asphalt binder modification: Mechanism, thermal properties, and ageing performance

Characterization of wax precipitation in wax-doped asphalt binders by variable-temperature polarized light microscope and improved viscosity algorithm

Effects of crystalline wax and asphaltene on thermoreversible aging of asphalt binder

Effects of SARA fractions on low temperature properties of asphalt binders

Wax crystal dynamics and viscosity abnormal reduction in asphaltene-containing waxy oil at low temperatures

Investigation of the Microcharacteristics of Asphalt Mastics under Dry–Wet and Freeze–Thaw Cycles in a Coastal Salt Environment

Non-isothermal low-temperature reversible aging of commercial wax-based warm mix asphalts

Study on the Phase Behavior of Asphalt Mastic

Effect of wax additives on asphalt rheological behavior as road paving material

Probing the interaction between asphaltene-wax and its effects on the crystallization behavior of waxes in heavy oil via molecular dynamics simulation

Investigation of the Effects of Wax Additive on the Properties of Asphalt Binder

Effect of molecular structure on low-temperature properties of bitumen based on molecular dynamics

Average molecular structure models of unaged asphalt binder fractions

Experimental and molecular dynamics simulation of hard asphalt microstructure

Influence of Paraffin on the Microproperties of Asphalt Binder Using MD Simulation

Investigating the relationship between chemical composition and mechanical properties of asphalt binders using atomic force microscopy (AFM)

Mechanism of Low- and Intermediate-Temperature Performance Improvement of Reclaimed Oil-Modified Asphalt

Investigation of Adhesion Performance of Wax Based Warm Mix Asphalt with Molecular Dynamics Simulation

Understanding of Asphalt Chemistry Based on the Six-Fraction Method

Another look at the use of modulated differential scanning calorimetry to study thermoreversible aging phenomena in asphalt binders