Abstract:The thermal pyrolysis of high-density polyethylene in a fixed bed reactor has been studied in the temperature range of 450–550 °C with two different nitrogen carrier gas flowrates, 2 and 4nullLnullmin −1 , to study the effect of these process parameters as well as the resultant vapour residence times on the formation of wax and its chemical and thermal properties. The technology had a high selectivity to waxes, with a yield of up to 91.87% wax from high-density polyethylene at 500 °C using a nitrogen carrier gas flowrate of 4nullLnullmin −1 and subsequent 1.76 second vapour residence time, calculated using the ideal gas law. The waxes were characterised using techniques including gas-chromatography-mass spectroscopy (GC-MS), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The process operating temperature especially and its subsequent effect on vapour residence times within the reactor had a considerable impact on both the chemical and thermal properties of the waxes. Higher operating temperatures yielded more olefinic waxes due to the promotion of degradation radical mechanisms such as β-scission. They were observed to have higher melting points and thermal stability. An investigation was conducted to assess the thermal properties and ageing performance of the waxes. Thermal conditioning in an ashing oven at 170 °C for 0–6 hours was conducted with a detailed analysis of GC-MS and FTIR at each stage of thermal exposure to further support thermal characterisation results. The changes in chemical composition were attributed mainly to oxidation and polymerization ageing reactions and were seen to be more prominent in the more unsaturated waxes produced at higher pyrolysis temperatures. The wax produced at 550 °C was determined the optimal wax for binder modification in hot-mix asphalt pavement design due to lower volatile/mass loss. A lower temperature range was suggested for optimal blending conditions to further reduce loss of volatiles with initial blending and storage.

Characterization of wax precipitation in wax-doped asphalt binders by variable-temperature polarized light microscope and improved viscosity algorithm

Mechanism and Rheological Characterization of MDI Modified Wood-Based Bio-Oil Asphalt

Effects of Asphalt Binder Type on Mixing Flowability and Workability Index of Asphalt Mixtures

Research on High- and Low-Temperature Rheological Properties of High-Viscosity Modified Asphalt Binder

Investigation of Viscoelastic Properties of Polymer-Modified Asphalt at Low Temperature Based on Gray Relational Analysis

Nonlinear Viscoelasticity and Viscoplasticity Characteristics of Virgin and Modified Asphalt Binders

Separation of wax fraction in asphalt binder by an improved method and determination of its molecular structure

Nonlinear Viscoelastoplastic Kinetics for High-Temperature Performance of Modified Asphalt Binders

Wax crystal dynamics and viscosity abnormal reduction in asphaltene-containing waxy oil at low temperatures

Effect of Fischer-Tropsch wax on the performance of high-viscosity polymer asphalt binders

Non-isothermal low-temperature reversible aging of commercial wax-based warm mix asphalts

Effect of wax additives on asphalt rheological behavior as road paving material

Impact of Diamond Nanothread on the Viscosity of Asphalt Binder: Insights from Atomistic Simulations

Investigation of high-density polyethylene pyrolyzed wax for asphalt binder modification: Mechanism, thermal properties, and ageing performance

Probing the interaction between asphaltene-wax and its effects on the crystallization behavior of waxes in heavy oil via molecular dynamics simulation

Research on low temperature rheological behavior of aging resistant bitumen and mixture

Low-Temperature Characteristic Evaluations of Base and Hybrid Asphalt Binders

Assessing the Impact of Ultra-Thin Diamond Nanothreads on the Glass Transition Temperature of a Bituminous Binder

Preparation of Wax-Based Warm Mixture Additives from Waste Polypropylene (PP) Plastic and Their Effects on the Properties of Modified Asphalt

Effects of crystalline wax and asphaltene on thermoreversible aging of asphalt binder

Study on Viscoelastic Properties of Various Fiber-Reinforced Asphalt Binders